Sweep: SWI-Prolog Embedded in Emacs

Next:   [Contents][Index]

Sweep: SWI-Prolog Embedded in Emacs

This manual is for Sweep (version 0.27.6), an Emacs package providing an embedded SWI-Prolog runtime inside of Emacs along with an advanced SWI-Prolog development environment.

Table of Contents


1 Overview

Sweep is an embedding of SWI-Prolog in Emacs. It provides an interface for executing Prolog queries and consuming their results from Emacs Lisp (see Querying Prolog). Sweep further builds on top of this interface and on top of the standard Emacs facilities to provide advanced features for developing SWI-Prolog programs in Emacs.


1.1 Main Features

Some of the main benefits that Sweep brings to working with Prolog code in Emacs are:

These features and others are documented in the rest of this manual, along with many options that Sweep provides for you to customize its behavior.


1.2 High-level Architecture

Sweep uses the C interfaces of both SWI-Prolog and Emacs Lisp to create a dynamically loaded Emacs module that contains the SWI-Prolog runtime. As such, Sweep has parts written in C, in Prolog and in Emacs Lisp.

The different parts of Sweep are structured as follows:

  • sweep.c defines a dynamic Emacs module which is referred to from Elisp as sweep-module. This module is linked against the SWI-Prolog runtime library (libswipl) and exposes a subset of the SWI-Prolog C interface to Emacs in the form of Elisp functions (see Querying Prolog). Notably, sweep-module is responsible for translating Elisp objects to Prolog terms and vice versa.
  • sweeprolog.el defines an Elisp library which builds on top of sweep-module to provide user-facing commands and functionality. It is also responsible for loading sweep-module the first time you do something that involves interacting with Prolog.
  • sweep.pl defines a Prolog module (named, unsurprisingly, sweep) which is by default arranged by sweeprolog.el to be loaded when the embedded Prolog runtime is initialized. It contains predicates that sweeprolog.el invokes through sweep-module to facilitate its different commands.

1.3 Comparison with Emacs’s built-in Prolog mode

Emacs has a built-in mode for Prolog code, defined in the library prolog.el that comes bundled with Emacs. prolog.el aims to work with a wide variety of Prolog systems and dialects, unlike Sweep that is very tightly integrated with SWI-Prolog specifically.

If you are working with SWI-Prolog, you’ll find Sweep to be far more powerful than the built-in prolog.el. This is because Sweep leverages the Prolog parser and other analysis tools that SWI-Prolog itself uses, which give it access to highly accurate and rich information about SWI-Prolog code. If you’re using another Prolog implementation, you should stick to prolog.el as Sweep only supports SWI-Prolog.


2 Installation

Installing Sweep requires:

Sweep is available from NonGNU ELPA, to install it simply type in Emacs M-x package-install RET sweeprolog RET.

Note that in Emacs prior to version 28, you need to explicitly enable NonGNU ELPA by adding something like the following to your Emacs configuration:

(with-eval-after-load 'package
  (add-to-list 'package-archives '("nongnu" . "https://elpa.nongnu.org/nongnu/")))

To upgrade Sweep to a newer version, do M-x package-upgrade RET sweeprolog RET.

For straight.el users, use the following form to install Sweep:

(straight-use-package '(sweeprolog :files (:defaults "*.pl")))

3 Getting Started

After installing the sweeprolog Elisp library, load it into Emacs:

(require 'sweeprolog)

Sweep tries to find SWI-Prolog by looking for the swipl executable in the directories listed in the Emacs variable exec-path. When Emacs is started from a shell, it initializes exec-path from the shell’s PATH environment variable which normally includes the location of swipl in common SWI-Prolog installations. If Emacs doesn’t find the swipl executable via exec-path, you can tell Sweep where to find it by setting the variable sweeprolog-swipl-path to point to it:

(setq sweeprolog-swipl-path "/path/to/swipl")

All set! You can now use Sweep for Prolog development (see Editing Prolog code) and for integrating Prolog into your Emacs Lisp code (see Querying Prolog). In the next section (see Discovering Sweep) you’ll find some useful tips for learning to work with Sweep.

Important note for Linux users: prior to version 29, Emacs would load dynamic modules in a way that is not fully compatible with the way the SWI-Prolog native library, libswipl, loads its own native extensions. This may lead to Sweep failing after loading sweep-module (see High-level Architecture). If you’re running Emacs 28 or earlier on Linux, you can workaround this issue by starting Emacs with libswipl loaded upfront via LD_PRELOAD, for example:

LD_PRELOAD=/usr/local/lib/libswipl.so emacs

4 Discovering Sweep

Sweep comes with many useful commands and features for working with SWI-Prolog. This section lists suggested ways for you to get to know the provided commands and make the most out of Sweep.

The main documentation resource for Sweep is this very manual. It describes almost every command and customization option that Sweep provides. Since Sweep includes many features, describing all them makes this manual longer then you’d probably want to read upfront. Instead it’s recommended that you skim this manual to get an idea of the available features, and then return to it as a reference during your work with Sweep.

To open this manual from within Emacs, type C-h i (info) to open the Info reader, followed by d m sweep RET to go to the top Info directory and select the Sweep manual. Sweep also provides a convenient command for opening the manual:

Command: sweeprolog-info-manual

Display the Sweep manual in Info.

To open the relevant part of the manual for a specific command that you want to learn more about, type C-h F followed by the name of that command. For example, typing C-h F sweeprolog-info-manual RET brings up this manual section in Info. If the command you’re interested in is bound to a key sequence, you can go to its Info node by typing C-h K followed by the key sequence that invokes it.

Other than the text in this manual, Sweep commands and user options have Elisp documentation strings that describe them individually. The various Emacs Help commands (C-h k, C-h f, C-h v, etc.) display these documentation strings in a dedicated Help buffer (see (emacs)Help). From the Help buffer, you can jump to the relevant Info node typing i (help-goto-info) to read more about related commands and customization options.

You can also view an HTML version of this manual online at https://eshelyaron.com/sweep.html.

To learn about recent changes and new features in Sweep, check out the NEWS file that comes with Sweep. You can open it with the command sweeprolog-view-news:

Command: sweeprolog-view-news

View the Sweep NEWS file.


5 Prolog Initialization and Cleanup

The embedded SWI-Prolog runtime must be initialized before it can start executing queries. Normally, Sweep takes care of initializing Prolog for you the first time you use a command that requires running some Prolog code. This section elaborates about Prolog initialization and its customization options in Sweep:

User Option: sweeprolog-init-args

List of strings used as initialization arguments for Prolog. Sweep uses these as the args argument of sweeprolog-initialize when it initializes Prolog on-demand.

Sweep loads and initializes Prolog on-demand at the first invocation of a command that requires the embedded Prolog. The user option sweeprolog-init-args says which arguments to pass to Prolog initialization. Its value is a list of strings that you can extend if you want to pass specific command line flags SWI-Prolog. For example, to limit the embedded Prolog stack to 512 MB, add the following to your Emacs configuration:

(with-eval-after-load 'sweeprolog
  (push "--stack-limit=512m" sweeprolog-init-args))

Sweep initializes Prolog from Elisp by calling function sweeprolog-initialize.

Function: sweeprolog-initialize prog &rest args

Initialize the embedded Prolog runtime. prog should be the path to the swipl executable, and args should be a list of command line arguments for swipl. Sweep initializes Prolog as if it was started from the command line as prog args.

The function sweeprolog-initialize takes one or more string arguments and initializes the embedded Prolog as if it were invoked externally in a command line with the given strings as command line arguments, where the first argument to sweeprolog-initialize corresponds to argv[0]. This function is implemented in C in sweep-module (see High-level Architecture).

The default value of sweeprolog-init-args is set to load the Prolog helper library sweep.pl and to create a boolean Prolog flag called sweep with value true. You can check for this flag in Prolog code to detect at runtime that you’re running under Sweep.

It is also possible to specify initialization arguments to SWI-Prolog by passing them as command line arguments to Emacs, which can be convenient when using Emacs and Sweep as an alternative for the common shell-based interaction with SWI-Prolog. This is achieved by adding the flag --swipl-args followed by any number of arguments intended for SWI-Prolog, with a single semicolon (;) argument marking the end of the SWI-Prolog arguments, after which further arguments are processed by Emacs as usual (see (emacs)Emacs Invocation for more information about Emacs’s command line options), for example:

emacs --some-emacs-option --swipl-args -l foobar.pl \; --more-emacs-options

In order for Sweep to be able to handle Emacs’s command line arguments, you must call sweeprolog-handle-command-line-args before Emacs processes the --swipl-args argument.

Function: sweeprolog-handle-command-line-args

Enable support for the Sweep-specific --swipl-args Emacs command line flag. This flag can be used to specify additional Prolog initialization arguments for Sweep to use when initializing Prolog on-demand, directly from Emacs’s command line invocation.

This function makes Emacs recognize the --swipl-args command line flag by adding a dedicated handler function to command-line-functions (see (elisp)Command-Line Arguments). If you want to use --swipl-args, you should arrange for command-line-functions to run before Emacs processes --swipl-args. To do that, either place a call sweeprolog-handle-command-line-args in your Emacs configuration, or call it from the command line right before --swipl-args:

emacs -f sweeprolog-handle-command-line-args --swipl-args -l foobar.pl \;

You can shut down or restart the embedded Prolog runtime using the following commands:

Command: sweeprolog-shutdown

Shut down the embedded Prolog runtime.

Command: sweeprolog-restart

Restart the embedded Prolog runtime.

The command sweeprolog-shutdown shuts down the Prolog runtime and frees up resources Prolog allocated. You cannot shut down Prolog with running top-levels (see The Prolog Top-level)—if you invoke sweeprolog-shutdown while you have running top-levels, this command suggests killing them, and if you refuse it complains and keeps Prolog running. The command sweeprolog-restart is similar to sweeprolog-shutdown, expect it starts the embedded Prolog runtime anew after shutting it down. When you invoke sweeprolog-restart with a prefix argument (C-u M-x sweeprolog-restart RET), this command prompts for additional initialization arguments to pass to the embedded Prolog runtime when restarting it.


6 Querying Prolog

This section describes a set of Elisp functions that let you invoke Prolog queries and interact with the embedded Prolog runtime:

Function: sweeprolog-open-query cxt mod functor input reverse

Query the Prolog predicate mod:functor/2 in the context of the module cxt. Convert input to a Prolog term and use it as the first argument, unless reverse is non-nil, in which can use input as the second argument. The other argument is called the output argument of the query, it is expected to be unified with some output that the query wants to return to Elisp. The output argument can be retrieved with sweeprolog-next-solution. This function always returns t when its arguments are valid, otherwise it returns nil.

Function: sweeprolog-next-solution

Return the next solution of the last Prolog query. Return a cons cell (det . output) if the query succeeded, where det is the symbol ! if no choice points remain and t otherwise, and output is the output argument of the query converted to an Elisp S-expression. If there are no more solutions, return nil instead. If a Prolog exception was thrown, return a cons cell (exception . exp) where exp is the exception term converted to Elisp.

Function: sweeprolog-cut-query

Cut the last Prolog query. This releases any resources reserved for it and makes further calls to sweeprolog-next-solution invalid until you open a new query.

Function: sweeprolog-close-query

Close the last Prolog query. Similar to sweeprolog-cut-query expect that any unifications created by the last query are dropped.

Sweep provides the Elisp function sweeprolog-open-query for invoking Prolog predicates. The predicate you invoke via this function must be of arity two, and it will be called in mode p(+In, -Out)—the predicate should treat the first argument as input and expect a variable as the second argument, which it should unify with some output. This restriction is placed in order to facilitate a natural calling convention between Elisp, a functional language, and Prolog, a logical one.

The sweeprolog-open-query function takes five arguments, the first three are strings which denote:

The fourth argument to sweeprolog-open-query is converted into a Prolog term and used as the first argument of the predicate (see Conversion of Elisp objects to Prolog terms). The fifth argument is an optional reverse flag—when this flag is set to non-nil, the order of the arguments is reversed such that the predicate is called in mode p(-Out, +In) rather than p(+In, -Out).

To examine th results of a Prolog query, use the function sweeprolog-next-solution. If the query succeeded, sweeprolog-next-solution returns a cons cell whose car is either the symbol ! when the success was deterministic or t otherwise, and the cdr is the current value of the second (output) Prolog argument converted to an Elisp object (see Conversion of Prolog terms to Elisp objects). If the query failed, sweeprolog-next-solution returns nil.

Sweep only executes one Prolog query at a given time, so you need to close close queries that you open with sweeprolog-open-query before opening new ones. When no more solutions are available for the current query (sweeprolog-next-solution returns nil), or when you’re otherwise not interested in more solutions, you must close the query with either sweeprolog-cut-query or sweeprolog-close-query. Both of these functions close the current query, but sweeprolog-close-query also destroys any Prolog bindings that it created.


6.1 Conversion of Elisp objects to Prolog terms

Sweep converts Elisp objects into Prolog terms to allow the Elisp programmers to specify arguments for Prolog predicates invocations (see Definition of sweeprolog-open-query). Seeing as some Elisp objects, like Elisp compiled functions, wouldn’t be as useful for passing to Prolog as others, Sweep only converts Elisp objects of certain types to Prolog, namely Sweep currently converts trees of strings and numbers:

  • Elisp strings are converted to equivalent Prolog strings.
  • Elisp integers are converted to equivalent Prolog integers.
  • Elisp floats are converted to equivalent Prolog floats.
  • The Elisp nil object is converted to the Prolog empty list [].
  • Elisp cons cells are converted to Prolog lists whose head and tail are the Prolog representations of the car and the cdr of the cons.

6.2 Conversion of Prolog terms to Elisp objects

Sweep converts Prolog terms into Elisp object to allow efficient processing of Prolog query results in Elisp (see Definition of sweeprolog-next-solution).

  • Prolog strings are converted to equivalent Elisp strings.
  • Prolog integers are converted to equivalent Elisp integers.
  • Prolog floats are converted to equivalent Elisp floats.
  • A Prolog atom foo is converted to a cons cell (atom . "foo").
  • The Prolog empty list [] is converted to the Elisp nil object.
  • Prolog lists are converted to Elisp cons cells whose car and cdr are the representations of the head and the tail of the list.
  • Prolog compounds are converted to list whose first element is the symbol compound. The second element is a string denoting the functor name of the compound, and the rest of the elements are the arguments of the compound in their Elisp representation.
  • All other Prolog terms (variables, blobs and dicts) are currently represented in Elisp only by their type:
    • Prolog variables are converted to the symbol variable,
    • Prolog blobs are converted to the symbol blob, and
    • Prolog dicts are converted to the symbol dict.

6.3 Counting solutions for a Prolog predicate in Elisp

Below is an example usage of the Sweep interface for calling Prolog. It shows an invocation of the non-deterministic predicate lists:permutation/2 directly from an function Elisp that counts the number of different permutations of the list (1 2 3 4 5):

(sweeprolog-open-query "user" "lists" "permutation" '(1 2 3 4 5))
(let ((num 0)
      (sol (sweeprolog-next-solution)))
  (while sol
    (setq num (1+ num))
    (setq sol (sweeprolog-next-solution)))
  (sweeprolog-close-query)
  num)

6.4 Calling Elisp function inside Prolog queries

Sweep defines the foreign Prolog predicates sweep_funcall/2 and sweep_funcall/3, that you can use for calling Elisp functions from Prolog code. You can only call these predicates in the context of a Prolog query initiated by sweeprolog-open-query, meaning that they only work in the main Prolog thread (which is also Emacs’s main thread). The first argument to these predicates is a Prolog string holding the name of the Elisp function to call. The last argument to these predicates is unified with the return value of the Elisp function, represented as a Prolog term (see Conversion of Elisp objects to Prolog terms). sweep_funcall/3 converts its second argument to an Elisp object (see Conversion of Prolog terms to Elisp objects) and passes it as a sole argument to the Elisp function it invokes. The sweep_funcall/2 variant invokes the Elisp function without any arguments.


7 Editing Prolog code

Sweep includes a dedicated major mode for reading and editing Prolog code—Sweep Prolog mode, or simply sweeprolog-mode.

Command: sweeprolog-mode

Enable the Sweep Prolog major mode for reading and editing SWI-Prolog code in the current buffer.

Variable: sweeprolog-mode-hook

Hook run after entering Sweep Prolog mode. See (emacs)Hooks, for more information about major mode hooks in Emacs.

To activate this mode in a buffer, type M-x sweeprolog-mode RET. To instruct Emacs to always open Prolog files in Sweep Prolog mode, modify the Emacs variable auto-mode-alist accordingly:

(add-to-list 'auto-mode-alist '("\\.plt?\\'"  . sweeprolog-mode))

See (emacs)Choosing Modes, for more information about how Emacs chooses a major mode to use when you visit a file.

To list all of the commands available in a Sweep Prolog mode buffer, type C-h m (describe-mode). When Menu Bar mode is enabled, you can run many of these commands via the Sweep menu. For more information about Menu Bar mode, see (emacs)Menu Bars.


7.1 Indentation

Sweep Prolog mode uses a bespoke indentation engine to determine the appropriate indentation of each line of Prolog code. The indentation engine analyses the syntactic context of a given line and decides how far it should be indented based on a set of indentation rules.

TAB
C-i

Indent the current line. If the region is active, indent all the lines within it (indent-for-tab-command).

Function: sweeprolog-indent-line

Indent the current line according to SWI-Prolog conventions. This function is used as the value of indent-line-function in Sweep Prolog mode buffers.

Command: sweeprolog-infer-indent-style

Infer the indentation style of the current buffer from its contents.

User Option: sweeprolog-indent-offset

Number of columns to indent nested code to in Sweep Prolog mode buffers.

The entry point of the indentation engine is the function sweeprolog-indent-line which takes no arguments and indents the line at point. Sweep Prolog mode cooperates with the standard Emacs interface for indentation by arranging for sweeprolog-indent-line to be called whenever a line should be indented, notably when you press TAB. For a full description of the available commands and options that pertain to indentation, See (emacs)Indentation.

The user option sweeprolog-indent-offset specifies how many columns Sweep keeps empty between every level of indentation. The standard Emacs variable indent-tabs-mode determines if indentation can use tabs or only spaces. You may sometimes want to adjust these options to match the indentation style used in an existing Prolog codebase. The command sweeprolog-infer-indent-style can do that for you by analyzing the contents of the current buffer and updating the buffer-local values of sweeprolog-indent-offset and indent-tabs-mode accordingly. Consider adding sweeprolog-infer-indent-style to sweeprolog-mode-hook to have it set up the indentation style automatically in all Sweep Prolog mode buffers:

(add-hook 'sweeprolog-mode-hook #'sweeprolog-infer-indent-style)

7.1.1 Indentation rules

Sweep Prolog mode indents lines according to the following rules:

  1. If the current line starts inside a string or a multi-line comment, do not indent.
  2. If the current line starts with a top term, do not indent.
  3. If the current line starts with a closing parenthesis and the matching opening parenthesis is part of a functor, indent to the column of the opening parenthesis if any arguments appear on the same line as the functor, otherwise indent to the start of the functor.

    This rule yields the following layouts:

    some_functor(
        some_arg
    ).
    
    some_functor( some_arg
                ).
    
  4. If the current line is the first non-comment line of a clause body, indent to the starting column of the head term plus the value of the user option sweeprolog-indent-offset (by default, four extra columns).

    As an example, this rule yields the following layouts when sweeprolog-indent-offset is set to the default value of four columns:

    some_functor(arg1, arg2) :-
        body_term.
    
    asserta( some_functor(arg1, arg2) :-
                 body_term
           ).
    
  5. If the current line starts with the right hand side operand of an infix operator, indent to the starting column of the first operand in the chain of infix operators of the same precedence.

    This rule yields the following layouts:

    head :- body1, body2, body3,
            body4, body5.
    
    A is 1 * 2 ^ 3 * 4 *
         5.
    
    A is 1 * 2 + 3 * 4 *
                 5.
    
  6. If the last non-comment line ends with a functor and its opening parenthesis, indent to the starting column of the functor plus sweeprolog-indent-offset.

    This rule yields the following layout:

    some_functor(
        arg1, ...
    
  7. If the last non-comment line ends with a prefix operator, indent to starting column of the operator plus sweeprolog-indent-offset.

    This rule yields the following layout:

    :- multifile
           predicate/3.
    

7.2 Semantic Highlighting

Sweep Prolog mode highlights Prolog code through the standard Emacs font-lock system (see (emacs)Font Lock). Sweep Prolog mode highlights different tokens in Prolog code according to their semantics, determined through static analysis that Sweep performs on demand. When you first open a buffer in Sweep Prolog mode, its entire contents are analyzed to collect and cache cross reference data, and Sweep highlight all of the code in the buffer accordingly. In contrast, while you edit and move around the buffer, Sweep uses a faster, local analysis for updating the semantic highlighting in response to changes in the buffer.

C-c C-c

Analyze the current buffer and update cross-references (sweeprolog-analyze-buffer).

User Option: sweeprolog-analyze-buffer-on-idle

Whether to analyze sweeprolog-mode buffers on idle. Defaults to t.

User Option: sweeprolog-analyze-buffer-max-size

Maximum number of characters in a Sweep Prolog mode buffer to analyze on idle. Larger buffers are not analyzed on idle. Defaults to 100,000 characters.

User Option: sweeprolog-analyze-buffer-min-interval

Minimum number of idle seconds to wait before analyzing a sweeprolog-mode buffer. Defaults to 1.5.

At any point in a sweeprolog-mode buffer, you can use the command C-c C-c (M-x sweeprolog-analyze-buffer) to update the cross reference cache and highlight the buffer accordingly. When Sweep’s Flymake integration is enabled, this command also updates the diagnostics for the current buffer (see Examining Diagnostics). This may be useful, for example, after defining a new predicate.

If the user option sweeprolog-analyze-buffer-on-idle is set to non-nil (as it is by default), Sweep also updates semantic highlighting in the buffer whenever Emacs is idle for a reasonable amount of time, unless the buffer is larger than the value of the sweeprolog-analyze-buffer-max-size user option. You can specify a minimum idle time for Sweep to wait before updating reanalyzing the buffer highlighting is controlled by customizing the user option sweeprolog-analyze-buffer-min-interval.

To view and customize the various faces that Sweep defines and uses for semantic highlighting, type M-x customize-group RET sweeprolog-faces RET. See (emacs)Faces, for more information about text faces in Emacs.


7.2.1 PceEmacs Highlighting Emulation

Sweep comes with a custom theme called sweeprolog-pce, that emulates the Prolog code highlighting provided by PceEmacs, the SWI-Prolog built-in Emacs-like editor (see Using the PceEmacs built-in editor in the SWI-Prolog manual). If you are starting out with Sweep after coming from PceEmacs, enabling this theme may soften your landing by providing a more familiar experience.

The sweeprolog-pce theme only affects faces that Sweep itself defines, so you can use it along other themes that you may have enabled. To enable this theme or the current Emacs session, type M-x load-theme RET sweeprolog-pce RET. To enable it for future sessions, add the following to your Emacs configuration:

(load-theme 'sweeprolog-pce t)

For more information about custom themes in Emacs, See (emacs)Custom Themes.

In versions up to and including 0.20.0, Sweep used to provide a different mechanism for emulating the highlighting of PceEmacs that involved customizing the user option sweeprolog-faces-style. When that option was set to light or dark, Sweep would use different sets of faces that mimic the highlighting of PceEmacs. sweeprolog-faces-style is now deprecated, and you should instead use the sweeprolog-pce theme. Still, in benefit of users that have sweeprolog-faces-style set and expect Sweep to use PceEmacs highlighting, Sweep checks if sweeprolog-faces-style is either light or dark when you first open a Prolog buffer, and if so it simply enables the sweeprolog-pce theme to get the same effect.


7.2.2 Highlighting occurrences of a variable

Sweep Prolog mode can highlight all occurrences of a given Prolog variable in the clause in which it appears. By default, occurrences of the variable at point are highlighted automatically whenever you move the cursor into a variable. To achieve this, Sweep uses the Emacs minor mode cursor-sensor-mode which allows for running hooks when the cursor enters or leaves certain text regions (see (elisp)Special Properties in the Elisp manual).

Command: sweeprolog-highlight-variable

Highlight occurrences of a Prolog variable in the clause at point. With a prefix argument, clear variable highlighting in the clause at point instead.

User Option: sweeprolog-enable-cursor-sensor

Whether to use cursor-sensor-mode to highlight occurrences of the Prolog variable across the current clause. Defaults to t.

To disable automatic variable highlighting based on the variable at point, customize sweeprolog-enable-cursor-sensor to nil.

To manually highlight occurrences of a variable in the current clause, use the command M-x sweeprolog-highlight-variable. This command prompts for variable to highlight, defaulting to the variable at point, if any. If you call it with a prefix argument (C-u M-x sweeprolog-highlight-variable RET), it clears all variable highlighting in the current clause instead.


7.2.3 Quasi-quotation highlighting

SWI-Prolog supports quasi-quotations, which allow you to incorporate different languages as part of your Prolog code. Sweep recognizes quasi-quotations and highlights their contents according to the Emacs mode corresponding to the quoted language.

User Option: sweeprolog-qq-mode-alist

Alist of (type . mode) pairs, where type is a Prolog quasi-quotation type, and mode is a symbol specifying the major mode to use for highlighting quasi-quoted text of type type.

The user option sweeprolog-qq-mode-alist specifies the association between SWI-Prolog quasi-quotation types and Emacs major modes. By default, Sweep defines associations for HTML and JavaScript quasi-quotation types. You can change the default choice of mode for these highlighting languages and add associations for other languages by customizing sweeprolog-qq-mode-alist.

If a quasi-quotation type does not have a matching mode in sweeprolog-qq-mode-alist, Sweep highlights the quoted content with the sweeprolog-qq-content face.

For more information about quasi-quotations in SWI-Prolog, see library(quasi_quotations) in the SWI-Prolog manual.


7.3 Hover for Help

In See Semantic Highlighting, we talked about how Sweep performs semantic analysis to determine the meaning of different terms in different contexts and highlight them accordingly. Beyond highlighting, Sweep can also tell you exactly what different tokens in Prolog code mean by annotating them with a textual description that’s displayed when you hover over them with the mouse.

User Option: sweeprolog-enable-help-echo

Whether to annotate Prolog tokens with help text via the help-echo text property. Defaults to t.

C-h .

Display the help-echo text of the token at point in the echo area (display-local-help).

If the user option sweeprolog-enable-help-echo is non-nil, as it is by default, Sweep annotates Prolog tokens with a short description of their meaning in that specific context. This is done by adding the help-echo text property to different parts of the buffer based on semantic analysis. The help-echo text is automatically displayed at the mouse tooltip when you hover over different tokens in the buffer.

Alternatively, you can display the help-echo text for the token at point in the echo area by typing C-h . (C-h followed by a dot).

The help-echo description of file specification in import directives is especially useful as it tells you which predicates that the current buffer uses actually come from the imported file. For example, if we have a Prolog file with the following contents:

:- use_module(library(lists)).

foo(Foo, Bar) :- flatten(Bar, Baz), member(Foo, Baz).

Then hovering over library(lists) shows:

Dependency on /usr/local/lib/swipl/library/lists.pl, resolves calls to flatten/2, member/2


7.4 Maintaining Code Layout

Some Prolog constructs, such as if-then-else constructs, have a conventional layout in which each goal starts at the fourth column after the beginning of the opening parenthesis or operator. For example:

(   if
->  then
;   else
*-> elif
;   true
)

To help you in maintaining the desired layout without having to manually count spaces, Sweep provides the command sweeprolog-align-spaces that updates the whitespace around point such that the next token is aligned to a (multiple of) four columns from the start of the previous token. Sweep also provides a dedicated minor mode sweeprolog-electric-layout-mode that adjusts whitespace around point automatically as you type (Electric Layout mode).


7.4.1 Inserting the Right Number of Spaces

Command: sweeprolog-align-spaces

Insert or remove spaces around point to such that the next Prolog token starts at a column distanced from the beginning of the previous token by a multiple of four columns.

User Option: sweeprolog-enable-cycle-spacing

Whether to add sweeprolog-align-spaces as the first element of cycle-spacing-actions in Sweep Prolog mode buffers. Defaults to t.

To insert or update whitespace around point, use the command M-x sweeprolog-align-spaces. As an example, consider a Sweep Prolog mode buffer with the following contents, where ∗ designates the location of the cursor:

foo :-
    (   if
    ;∗

Calling M-x sweeprolog-align-spaces inserts three spaces, to yield the expected layout:

foo :-
    (   if
    ;   ∗

In Emacs 29, you can extend the command M-x cycle-spacing via a list of callback functions specified by the variable cycle-spacing-actions. Sweep leverages this facility and adds sweeprolog-align-spaces as the first action of cycle-spacing. To inhibit sweeprolog-mode from doing so, set the user option sweeprolog-enable-cycle-spacing to nil.

Moreover, in Emacs 29 cycle-spacing is bound by default to M-SPC, which means that all you need to do to align if-then-else and similar constructs is to type M-SPC after the first token.

In Emacs prior to version 29, you can bind sweeprolog-align-spaces to M-SPC directly by adding the following lines to Emacs’s initialization file (see (emacs)Init File).

(eval-after-load 'sweeprolog
  '(define-key sweeprolog-mode-map (kbd "M-SPC") #'sweeprolog-align-spaces))

7.4.2 Electric Layout mode

The minor mode sweeprolog-electric-layout-mode adjusts whitespace around point automatically as you type:

Command: sweeprolog-electric-layout-mode

Toggle automatic whitespace adjustment according to SWI-Prolog conventions.

It works by examining the context of point whenever a character is inserted in the current buffer, and applying the following layout rules:

PlDoc’ Comments

Insert two consecutive spaces after the %! or %% starting a ‘PlDoc’ predicate documentation structured comment.

If-Then-Else

Insert spaces after a part of an if-then-else constructs such that point is positioned four columns after its beginning. The specific tokens that trigger this rule are the opening parenthesis ( and the operators ;, -> and *->, and only if they are inserted in a callable context, where an if-then-else construct would normally appear.

To enable this mode in a Sweep Prolog mode buffer, type M-x sweeprolog-electric-layout-mode RET. You can automate this step by adding sweeprolog-electric-layout-mode to sweeprolog-mode-hook in your Emacs configuration:

(add-hook 'sweeprolog-mode-hook #'sweeprolog-electric-layout-mode)

7.5 Term-based editing and motion commands

Emacs includes many useful features for operating on syntactic units in source code buffer, such as marking, transposing and moving over expressions. By default, these features are geared towards working with Lisp expressions, or S-expressions. Sweep extends Emacs’s notion of syntactic expressions to accommodate for Prolog terms, which allows the standard S-expression based commands to operate on Prolog terms seamlessly.

The Emacs manual covers the most important commands that operate on S-expressions, and by extension on Prolog terms. See (emacs)Expressions. Another useful command for Prolog programmers is M-x kill-backward-up-list, bound by default to C-M-^ in Sweep Prolog mode buffers.

C-M-^

Kill the Prolog term containing the current term, leaving the current term itself (kill-backward-up-list).

This command replaces the parent term containing the term at point with the term itself. To illustrate the utility of this command, consider the following clause:

head :-
    goal1,
    setup_call_cleanup(setup,
                       goal2,
                       cleanup).

Now with point anywhere inside goal2, calling kill-backward-up-list removes the setup_call_cleanup/3 term leaving goal2 to be called directly:

head :-
    goal1,
    goal2.

7.6 Holes

Holes are Prolog variables that some Sweep commands use as placeholder for other terms.

When writing Prolog code in the usual way of typing in one character at a time, the buffer text is often found in a syntactically incorrect state while you edit it. This happens for example right after you insert an infix operator, before typing its expected right-hand side argument. Sweep provides an alternative method for inserting Prolog terms in a way that maintains the syntactic correctness of the buffer text while allowing the user to incrementally refine it by using placeholder terms, called simply holes. Holes indicate the location of missing terms that the user can later fill in, essentially they represent source-level unknown terms and their presence satisfies the Prolog parser. Holes are written in the buffer as regular Prolog variables, but they are annotated with a special text property that allows Sweep to recognize them as holes needed to be filled.

See Inserting Terms with Holes, for a command that uses holes to let you write syntactically correct Prolog terms incrementally. Several other Sweep commands insert holes in place of unknown terms, including C-M-i (see Code Completion), C-M-m (see Context-Based Term Insertion) and M-x sweeprolog-plunit-testset-skeleton (see Writing Tests).


7.6.1 Inserting Terms with Holes

Use the command C-c RET to add a term to the buffer at point while keeping it syntactically correct. You don’t need to give the entire term at once, only its functor and arity. Sweep automatically inserts holes for the arguments (if any), which you can incrementally fill one after the other.

C-c RET

Insert a Prolog term with a given functor and arity at point, using holes for arguments (sweeprolog-insert-term-with-holes).

The main command for inserting terms with holes is sweeprolog-insert-term-with-holes. This command, bound by default to C-c C-m (or C-c RET) in Sweep Prolog mode buffers, prompts for a functor and an arity and inserts a corresponding term with holes in place of the term’s arguments. It leaves point right after the first hole, sets the mark to its start and activates the region such that the hole is marked. Call sweeprolog-insert-term-with-holes again to replace the active region, which now covers the first hole, with another term, that may again contain further holes. That way you can incrementally write a Prolog term, including whole clauses, by working down the syntactic structure of the term and maintaining its correctness all the while. Without a prefix argument, sweeprolog-insert-term-with-holes prompts for the functor and the arity to use. A non-negative prefix argument, such as C-2 C-c C-m or C-u C-c C-m, is taken to be the inserted term’s arity and in this case sweeprolog-insert-term-with-holes only prompts for the functor to insert. A negative prefix argument, C-- C-c C-m, inserts only a single hole without prompting for a functor. To further help with keeping the buffer syntactically correct, this command adds a comma (,) before or after the inserted term when needed according to the surrounding tokens. If you call it at the end of a term that doesn’t have a closing fullstop, it adds the fullstop after the inserted term.


7.6.2 Jumping to Holes

Use these commands to move between holes in the current Prolog buffer:

C-c TAB
C-c C-i

Move point to the next hole in the buffer and select it as the region. With numeric prefix argument n, move forward over n - 1 holes and select the next one (sweeprolog-forward-hole).

C-c S-TAB
C-c C-I

Move point to the previous hole in the buffer and select it as the region. With numeric prefix argument n, move backward over n - 1 holes and select the next one (sweeprolog-backward-hole).

C-0 C-c TAB
C-0 C-c C-i

Display the number of holes that are present in the buffer (sweeprolog-count-holes).

Command: sweeprolog-forward-hole-on-tab-mode

Toggle moving to the next hole in the buffer with TAB if the current line is already properly indented.

To jump to the next hole in a Sweep Prolog mode buffer, use the command sweeprolog-forward-hole, bound by default to C-c TAB (or C-c C-i). This command sets up the region to cover the next hole after point leaving the cursor at right after the hole. To jump to the previous hole use C-c S-TAB (sweeprolog-backward-hole), or call sweeprolog-forward-hole with a negative prefix argument (C-- C-c TAB).

You can also call sweeprolog-forward-hole and sweeprolog-backward-hole with a numeric prefix argument to jump over the specified number of holes. For example, typing C-3 C-c TAB skips the next two holes in the buffer and selects the third as the region. As a special case, if you call these commands with a zero prefix argument (C-0 C-c TAB), they invoke the command sweeprolog-count-holes instead of jumping. This command counts how many holes are left in the current buffer and reports its finding via a message in the echo area.

When the minor mode sweeprolog-forward-hole-on-tab-mode is enabled, the TAB key is bound to a command moves to the next hole when called in a properly indented line (otherwise it indents the line). This makes moving between holes in the buffer easier since you can use TAB instead of C-c TAB in most cases. To enable this mode in a, type M-x sweeprolog-forward-hole-on-tab-mode-map RET. You can automate this step by adding sweeprolog-forward-hole-on-tab-mode to sweeprolog-mode-hook in your Emacs configuration:

(add-hook 'sweeprolog-mode-hook #'sweeprolog-forward-hole-on-tab-mode)

7.6.3 Filling Holes

Filling a hole means replacing it in the buffer with a Prolog term. The simplest way to fill a hole is how you would replace any other piece of text in Emacs—select it as the region, kill it (for example, with C-w) and insert another Prolog term in its place. For more information about the region, (emacs)Mark in the Emacs manual.

Yanking a hole with C-y (yank) after you kill it removes the special hole property and inserts it as a plain variable. This can be useful if you want to keep the variable name that Sweep chose for the hole—simply press C-w C-y with the hole marked. You can also use the command sweeprolog-fill-holes, which turns all holes in the current region to plain variables.

As an alternative to manually killing the region with C-w, if you enable Delete Selection mode (delete-selection-mode), the hole is automatically removed as soon as you start typing while its marked. See (emacs)Using Region, for more information about Delete Selection mode.

Most Sweep commands that insert holes also move to the first hole they insert and select it as the region for you to fill it. Similarly, jumping to the next hole in the buffer with C-c TAB also selects it. The command C-c RET is specifically designed for filling holes by deleting the selected hole and inserting a Prolog term at once (see Inserting Terms with Holes).


Previous: , Up: Holes   [Contents][Index]

7.6.4 Highlighting Holes

Sweep highlights holes in Prolog buffer by default so you can easily identify missing terms.

User Option: sweeprolog-highlight-holes

Whether to highlight holes in Sweep Prolog mode buffers with a dedicated face. By default, this is set to t.

When the user option sweeprolog-highlight-holes is set to non-nil, Sweep highlights holes in Prolog buffers with a dedicated face to make them easily distinguishable from regular Prolog variables. Hole highlighting is enabled by default, to disable it customize sweeprolog-highlight-holes to nil.


7.7 Definitions and References

Sweep Prolog mode integrates with the Emacs xref API to facilitate quick access to predicate definitions and references in Prolog code buffers. This enables the many commands that the xref interface provides, like M-. (xref-find-definitions) for jumping to the definition of the predicate at point. See (emacs)Find Identifiers, for an overview of the available commands.

Sweep Prolog mode also integrates with Emacs’s imenu, which provides a simple facility for looking up and jumping to definitions in the current buffer. To jump to a definition in the current buffer, type M-x imenu RET (bound by default to M-g i in Emacs version 29 or later). For information about customizing imenu, (emacs)Imenu.

You can use the command sweeprolog-xref-project-source-files to update Sweep’s cross reference data for all Prolog source files in the current project. To determine the set of source files in the current project, Sweep consults the functions project-current and project-files (see (emacs)Projects). When you search for references to Prolog predicates with M-? (xref-find-references), Sweep implicitly invokes sweeprolog-xref-project-source-files to bring you up-to-date references from across the current project.


7.8 Predicate Definition Boundaries

The following commands act on entire Prolog predicate definitions as a single unit:

M-n

Move forward from point to the next predicate definition in the current buffer (sweeprolog-forward-predicate).

M-p

Move backward from point to the previous predicate definition (sweeprolog-backward-predicate).

M-h

Select the current predicate as the active region, put point at the its beginning, and the mark at the end (sweeprolog-mark-predicate).

In Sweep Prolog mode, the commands M-n (sweeprolog-forward-predicate) and M-p (sweeprolog-backward-predicate) are available for quickly jumping to the first line of the next or previous predicate definition in the current buffer.

The command M-h (sweeprolog-mark-predicate) marks the entire predicate definition at point, along with its ‘PlDoc’ comments if there are any. As an example, you can use this command to move an entire predicate definition typing M-h C-w and then yanking it elsewhere with C-y.


7.9 Following File Specifications

In SWI-Prolog, one often refers to source file paths using file specifications, special Prolog terms that act as path aliases, such as library(lists) which refers to a file lists.pl in any of the Prolog library directories.

C-c C-o

Resolve file specification at point and visit the specified file (sweeprolog-find-file-at-point).

Function: sweeprolog-file-at-point &optional point

Return the file name specified by the Prolog file specification at point.

You can follow file specifications that occur in Sweep Prolog mode buffers with C-c C-o (or M-x sweeprolog-find-file-at-point RET) whenever point is over a valid file specification. For example, consider a Prolog file buffer with the common directive use_module/1:

:- use_module(library(lists)).

With point anywhere inside library(lists), type C-c C-o to open the lists.pl file in the Prolog library.

Sweep also extends Emacs’s file-name-at-point-functions hook with the function sweeprolog-file-at-point that returns the resolved Prolog file specification at point, if any. Emacs uses this hook to populate the “future history” of minibuffer prompts that read file names, such as the one you get when you type C-x C-f (find-file). In particular this means that if point is in a Prolog file specification, you can type M-n after C-x C-f to populate the minibuffer with the corresponding file name. You can then go ahead and visit the file by typing RET, or you can edit the minibuffer contents and visit a nearby file instead.

For more information about file specifications in SWI-Prolog, see absolute_file_name/3 in the SWI-Prolog manual.


7.10 Loading Buffers

You can load a buffer of SWI-Prolog code with the following command:

C-c C-l

Load the current buffer into the embedded SWI-Prolog runtime (sweeprolog-load-buffer).

Use the command sweeprolog-load-buffer to load the contents of a Sweep Prolog mode buffer into the embedded SWI-Prolog runtime. After a buffer is loaded, you can query the predicates it defines from Elisp (see Querying Prolog) and from the Sweep top-level (see The Prolog Top-level). In Sweep Prolog mode buffers, sweeprolog-load-buffer is bound to C-c C-l. By default this command loads the current buffer if its major mode is sweeprolog-mode, and prompts for an appropriate buffer otherwise. To choose a different buffer to load while visiting a sweeprolog-mode buffer, invoke sweeprolog-load-buffer with a prefix argument (C-u C-c C-l).

The mode line displays the word ‘Loaded’ next to the ‘Sweep’ major mode indicator if the current buffer has been loaded and hasn’t been modified since. See (emacs)Mode Line, for more information about the mode line.

More relevant information about loading code in SWI-Prolog can be found in Loading Prolog source files in the SWI-Prolog manual.


7.11 Setting Breakpoints

You can set breakpoints in Sweep Prolog mode buffers to have SWI-Prolog break before specific goals in the code (see Breakpoints in the SWI-Prolog manual).

C-c C-b

Set a breakpoint (sweeprolog-set-breakpoint).

User Option: sweeprolog-highlight-breakpoints

Whether to highlight breakpoints in Sweep Prolog mode buffers. Defaults to t.

The command sweeprolog-set-breakpoint, bound to C-c C-b, sets a breakpoint at the position of the cursor. If you call it with a positive prefix argument (for example, C-u C-c C-b), it creates a conditional breakpoint with a condition goal that you insert in the minibuffer. If you call it with a non-positive prefix argument (for example, C-0 C-c C-b), it deletes the breakpoint at point instead.

When Context Menu mode is enabled, you can also create and delete breakpoints in sweeprolog-mode buffers through right-click context menus (see Context Menu).

By default, Sweep highlights terms with active breakpoints in Sweep Prolog mode buffers. To inhibit breakpoint highlighting, customize the user option sweeprolog-highlight-breakpoints to nil.


7.11.1 Breakpoint Menu

Sweep provides a breakpoint menu that lets you manage breakpoints across your codebase.

Command: sweeprolog-list-breakpoints

Display a list of active breakpoints.

To open the breakpoint menu, type M-x sweeprolog-list-breakpoints RET. This command opens the breakpoint menu in the *Sweep Breakpoints* buffer. The major mode of this buffer is Sweep Breakpoint Menu, which is a special mode that includes useful commands for managing Prolog breakpoints:

RET

Go to the position of the breakpoint corresponding to the breakpoint menu entry at point.

o

Show the position of the breakpoint corresponding to the breakpoint menu entry at point, in another window (sweeprolog-breakpoint-menu-find-other-window).

c

Set the condition goal for the breakpoint corresponding to the breakpoint menu entry at point (sweeprolog-breakpoint-menu-set-condition).


7.12 Creating New Modules

Sweep integrates with the Emacs auto-insert command to assist you with creating of new SWI-Prolog modules. You can use auto-insert to populate new Prolog files with module template.

User Option: sweeprolog-module-header-comment-skeleton

Additional content to put in the topmost comment in Prolog module headers.

The command auto-insert in Sweep Prolog mode inserts a Prolog module skeleton that begins with a module header multi-line comment. By default, this header includes your name and email address (user-full-name and user-mail-address respectively). If you want the header to contain more information, you can extend it to suite yours needs by customizing sweeprolog-module-header-comment-skeleton. This can be useful, for example, for including copyright text in the header.

After the header, the module skeleton inserts a module/2 directive with the module name set to the base name of the file.

Lastly the skeleton includes a ‘PlDoc’ module comment for you to fill with the module’s documentation (see File comments in the SWI-Prolog manual).

As an example, open a new Prolog file and call it foo.pl by typing C-x C-f foo.pl RET, and insert the module skeleton with M-x auto-insert RET. The buffer contents should now be as follows:

/*
    Author:        John Doe
    Email:         john.doe@example.com

*/

:- module(foo, []).

/** <module>

*/

To automatically insert the module skeleton whenever you open a new Prolog file, enable the minor mode auto-insert-mode. See (autotype)Autoinserting in the Autotyping manual, for detailed information about auto-insert and its customization options.


7.13 Documenting Predicates

SWI-Prolog predicates can be documented with specially structured comments placed above the predicate definition, which are processed by the ‘PlDoc’ source documentation system. Emacs comes with many useful commands specifically intended for working with comments in programming languages, which apply also to writing ‘PlDoc’ comments for Prolog predicates. For an overview of the relevant standard Emacs commands, see (emacs)Comment Commands.

C-c C-d

Insert ‘PlDoc’ documentation comment for the predicate at or above point (sweeprolog-document-predicate-at-point).

User Option: sweeprolog-read-predicate-documentation-function

Function to use for determining the initial contents of documentation comments that you insert with sweeprolog-document-predicate-at-point.

Function: sweeprolog-read-predicate-documentation-default-function

Prompt and read from the minibuffer the argument modes, determinism specification and initial summary of the given predicate.

Function: sweeprolog-read-predicate-documentation-with-holes

Use holes for the initial documentation of the given predicate.

Sweep also includes a dedicated command called sweeprolog-document-predicate-at-point for interactively creating ‘PlDoc’ comments for predicates in sweeprolog-mode buffers. This command, bound by default to C-c C-d, finds the beginning of the predicate definition under or right above the current cursor location, and inserts a formatted ‘PlDoc’ comment. This command fills in initial argument modes, determinism specification, and optionally a summary line for the documented predicate. There are different ways in which sweeprolog-document-predicate-at-point can obtain the needed initial documentation information, depending on the value of the user option sweeprolog-read-predicate-documentation-function which specifies a function to retrieve this information. The default function prompts you to insert the parameters one by one via the minibuffer. Alternatively, you can use holes (see Holes) for the predicate’s argument modes and determinism specifiers by setting this option to sweeprolog-read-predicate-documentation-with-holes, as follows:

(setq sweeprolog-read-predicate-documentation-function
      #'sweeprolog-read-predicate-documentation-with-holes)

sweeprolog-document-predicate-at-point leaves the cursor at the end of the newly inserted documentation comment for you to extend or edit it as you see fit. To add another comment line, use M-j (default-indent-new-line) which starts a new line with the comment prefix filled in. Emacs has other powerful built-in features for working with comments in code buffers that you can leverage to edit ‘PlDoc’ comments—See (emacs)Comments, for the full details. Furthermore you can make use of the rich support Emacs provides for editing natural language text when working on ‘PlDoc’ comments. For example, to nicely format a paragraph of text, use M-q (fill-paragraph). Many useful commands for editing text are documented in (emacs)Text, which see.

For more information about ‘PlDoc’ and source documentation in SWI-Prolog, see the PlDoc manual.


7.14 Example Usage Comments

Beyond documenting your code with ‘PlDoc’ comments as described in Documenting Predicates, you may want to have comments in your source code that demonstrate example usage of some predicate or another. Creating such comments usually involves posting queries in a Prolog top-level, copying the queries and their results into the relevant source code buffer, and formatting them as comments. Sweep provides the following command to streamline this process:

C-c C-%

Start a new top-level for recording example usage. When you finish interacting with the top-level its contents are formatted as a comment in the buffer and position where you invoked this command (sweeprolog-make-example-usage-comment).

The command sweeprolog-make-example-usage-comment, bound to C-c C-% in Sweep Prolog mode buffers, creates and switches to a new top-level buffer for recording example usage that you want to demonstrate. The example usage top-level is a regular top-level buffer (see The Prolog Top-level), except that it’s tied to the specific position in the source buffer where you invoke this command. You can post queries in the example usage top-level and edit it freely, then type C-c C-q in to quit the top-level buffer and format its contents as a comment in the source buffer.

You can have multiple example usage top-levels for different parts of your code at the same time. To display the source position where you created a certain usage example top-level buffer by, type C-c C-b in that buffer.


7.15 Displaying Predicate Documentation

Sweep integrates with the Emacs minor mode ElDoc, which automatically displays documentation for the predicate at point. Whenever you move the cursor into a predicate definition or invocation, ElDoc displays the signature and summary of that predicate in the echo area at the bottom of the frame.

User Option: sweeprolog-enable-eldoc

Whether to enable ElDoc support in sweeprolog-mode buffers. Defaults to t.

To disable the ElDoc integration in Sweep Prolog mode buffers, customize the user option sweeprolog-enable-eldoc to nil.

See (emacs)Programming Language Doc, for more information about ElDoc and its customization options.


7.16 Examining Diagnostics

Sweep can diagnose problems in Prolog code and report them to the user by integrating with Flymake, a powerful interface for on-the-fly diagnostics built into Emacs.

User Option: sweeprolog-enable-flymake

Whether to enable Flymake support in Sweep Prolog mode buffers. Defaults to t.

C-c C-`

List diagnostics for the current buffer or project in a dedicated buffer (sweeprolog-show-diagnostics).

Flymake integration is enabled by default, to disable it customize the user option sweeprolog-enable-flymake to nil.

When this integration is enabled, several Flymake commands are available for listing and jumping between found errors. see (flymake)Finding diagnostics, for a full description of these commands. Additionally, Sweep Prolog mode configures the standard command M-x next-error to operate on Flymake diagnostics. This allows for moving to the next (or previous) error location with the common M-g n (or M-g p) keybinding. See (emacs)Compilation Mode, for more information about these commands.

The command sweeprolog-show-diagnostics shows a list of Flymake diagnostics for the current buffer. It is bound by default to C-c C-` in Sweep Prolog mode buffers with Flymake integration enabled. When you call it with a prefix argument (C-u C-c C-`), it shows a list of diagnostics for all buffers in the current project.


7.17 Exporting Predicates

When you define a predicate in a Prolog mode, by default it is only visible inside that module, unless you export it by including the predicate in the export list of the defining module (the export list of a module is the second argument of the module/2 directive).

C-c C-e

Add the predicate predicate at point to the export list of the current Prolog module (sweeprolog-export-predicate).

Sweep provides a convenient command for exporting predicates that you define in Sweep Prolog mode buffers. To add the predicate near point to the export list of the current module, use the command C-c C-e (sweeprolog-export-predicate). If the current predicate is documented with a ‘PlDoc’ comment, this command adds a comment with the predicate’s mode after its name in the export list. If point is not near a predicate definition, calling sweeprolog-export-predicate prompts for a predicate to export with completion for non-exported predicates in the current buffer. To force sweeprolog-export-predicate to prompt even when point is on a predicate definition, invoke it with a prefix argument (C-u C-c C-e).


7.18 Code Completion

In Emacs, major modes for different programming languages provide in-buffer code completion via a standard generic command called completion-at-point (see (emacs)Symbol Completion). This command is normally bound to C-M-i and M-TAB. Sweep extends completion-at-point with context-aware completion for Prolog code in Prolog buffers.

When providing candidates for in-buffer completion, Sweep takes into account the code surrounding the cursor to determine what kind of completion makes most sense:

Variable name completion

If the text before point can be completed to one or more variable names that appear elsewhere in the current clause, completion-at-point suggests matching variable names as completion candidates.

Predicate completion

If point is at a callable position, completion-at-point suggests matching predicate calls. If the predicate you choose takes arguments, Sweep inserts holes in their places, and moves point to the first argument (see Holes).

Predicate option completion

If point is inside a predicate options list, completion-at-point suggests matching options or option values for the appropriate predicate.

Source file completion

If point is at a position where a source file specification should appear (such as the argument of use_module/1), completion-at-point suggests matching source file specifications.

Arithmetic function completion

If point is inside an arithmetic expression, completion-at-point suggests matching arithmetic functions.

Flag completion

If point is at a position where a Prolog flag should appear (such as the first argument of set_prolog_flag/2), completion-at-point suggests matching flags.

Atom completion

If point is at a non-callable position, completion-at-point suggests matching atoms and functors.


7.19 Context-Based Term Insertion

As a means of automating common Prolog code editing tasks, such as adding new clauses to an existing predicate, Sweep Prolog mode provides the “do what I mean” command sweeprolog-insert-term-dwim, bound by default to C-M-m (or equivalently, M-RET). This command inserts a new term in the current buffer according to the context in which you invoke it.

M-RET
C-M-m

Insert an appropriate Prolog term in the current buffer, based on the current context (sweeprolog-insert-term-dwim).

Variable: sweeprolog-insert-term-functions

List of functions for sweeprolog-insert-term-dwim to try for inserting a Prolog term based on the current context.

To determine which term to insert and exactly where, the command sweeprolog-insert-term-dwim calls the functions in the list sweeprolog-insert-term-functions one after the other until one of them succeeds. The functions on this list are called term insertion functions, each insertion function takes two arguments—the position where you invoke sweeprolog-insert-term-dwim and the prefix argument you give it, if any—and returns non-nil after performing its specific insertion if it is applicable in the current context.

By default, sweeprolog-insert-term-functions contains the following insertion functions:

Function: sweeprolog-maybe-extract-region-to-predicate

If the region is active and selects a goal, extract the selected goal into a separate predicate. With a prefix argument, also suggest replacing other goals in the buffer that the selected goal subsumes with invocations of the new predicate that this function creates. See Extracting Goals to Separate Predicates.

Function: sweeprolog-maybe-insert-next-clause

If the last token before point is a fullstop ending a predicate clause, insert a new clause below it.

Function: sweeprolog-maybe-define-predicate

If point is over a call to an undefined predicate, insert a definition for that predicate. By default, the new predicate definition is inserted right below the last clause of the current predicate definition. You can customize the user option sweeprolog-new-predicate-location-function to control where in the buffer this function inserts new predicate definitions.

This command inserts holes as placeholders for the body term and the head’s arguments, if any. See Holes.


7.20 Writing Tests

SWI-Prolog includes the ‘PlUnit’ unit testing framework1, in which you write unit tests in special blocks of Prolog code enclosed within the directives begin_tests/1 and end_tests/1. To insert a new block of unit tests (also known as a test-set) in a Prolog buffer, use the command M-x sweeprolog-plunit-testset-skeleton RET.

Command: sweeprolog-plunit-testset-skeleton

Insert a ‘PlUnit’ test-set skeleton at point.

This command prompts for a name to give the new test-set and inserts a template such as the following:

:- begin_tests(foo_regression_tests).

test() :- TestBody.

:- end_tests(foo_regression_tests).

The cursor is left between the parentheses of the test() head term, and the TestBody variable is marked as a hole (see Holes). To insert another unit test, place point after a complete test case and type C-M-m (or M-RET) to invoke sweeprolog-insert-term-dwim (see Context-Based Term Insertion).


7.21 Managing Dependencies

It is considered good practice to explicitly list the dependencies of your SWI-Prolog source files on predicates defined in other files by using autoload/2 and use_module/2 directives, rather than relying on implicit autoloads. To find all implicitly autoloaded predicates in the current sweeprolog-mode buffer and make the dependencies on them explicit, use the command sweeprolog-update-dependencies bound to C-c C-u.

C-c C-u

Add explicit dependencies for implicitly autoloaded predicates in the current buffer (sweeprolog-update-dependencies).

User Option: sweeprolog-dependency-directive

Determines which Prolog directive to use in sweeprolog-update-dependencies when adding new directives. The value of this user option is one of the symbols use-module, autoload or infer. If it is use-module, sweeprolog-update-dependencies adds use_module/2 directives, a value of autoload means to add autoload/2 directives, and infer says to infer which directive to use based on the existing dependency directives in the buffer, if any. Defaults to infer.

User Option: sweeprolog-note-implicit-autoloads

Whether Flymake should complain about implicitly autoloaded predicates in Sweep Prolog mode buffers.

The command sweeprolog-update-dependencies, bound to C-c C-u, analyzes the current buffer and adds or updates autoload/2 and use_module/2 directives as needed.

When this command adds a new directive, rather than updating an existing one, it can use either autoload/2 or use_module/2 to declare the new dependency based on the value of the user option sweeprolog-dependency-directive. If you set this option is to use-module, new dependencies use the use_module/2 directive. If it’s autoload, new dependencies use autoload/2. If it’s infer, as it is by default, new dependencies use autoload/2 unless the buffer already contains dependency directives and they are all use_module/2 directives, in which case they also use use_module/2.

By default, when Flymake integration is enabled (see Examining Diagnostics), Sweep highlights calls to implicitly autoloaded predicates and reports them as Flymake diagnostics. To inhibit Flymake from diagnosing implicit autoloads, customize the user option sweeprolog-note-implicit-autoloads to nil.


7.23 Query Replace Term

Sweep includes a powerful search and replace mechanism called Term Replace, that allows you to quickly and consistently transform some terms across a Prolog buffer. Term Replace searches for terms with the same flexibility and precision of Term Search (see Term Search), while letting you interactively transform and replace matching terms in place. You can use Term Replace to refactor your code in many ways, such as extending a predicate with another argument, or replacing all calls to a predicate with another one while transposing some of the arguments. If you’re familiar with Emacs’s Query Replace commands, you can think of Term Replace as a Prolog-specific superpowered version of query-replace-regexp (see (emacs)Query Replace). To initiate Term Replace, use the following command:

C-c C-S

Replace some terms after point matching a given template with a given replacement (sweeprolog-query-replace-term).

The command sweeprolog-query-replace-term (bound to C-c C-S) prompts for two Prolog terms, the template term and the replacement term, and then asks for each term in the buffer that matches the template if you want to replace it. You can use variables in the template term to capture sub-terms of the matching term, and use them in the replacement term. For example, if you want to transpose the two arguments in a bunch of calls to =/2, you can specify R=L as the template term and L=R as the replacement.

This command uses the same underlying term search as C-c C-s (sweeprolog-term-search) does for finding matches, expect that sweeprolog-query-replace-term only searches from point to the end of buffer. If you invoke sweeprolog-query-replace-term with an active region, it limits the operation to matching terms in the region. sweeprolog-query-replace-term highlights the current match with the sweeprolog-query-replace-term-current face, and all other matches with the sweeprolog-query-replace-term-match face. By default, these faces inherit from sweeprolog-term-search-current and sweeprolog-term-search-match, respectively. Furthermore, similarly to C-c C-s, you can invoke sweeprolog-query-replace-term with a prefix argument to refine the search with an arbitrary Prolog goal that matching terms must satisfy, or with two prefix arguments to target only terms in certain contexts. See Term Search for full details about prefix arguments and search refinement.

sweeprolog-query-replace-term goes over the matching terms in turn and asks you what to do with each. The available answers are:

y

Replace the current match and move to the next one.

n

Skip the current match without replacing it.

t

Replace the current match, show the result, and suggest reverting back before moving to the next match.

q

Quit without replacing the current match.

.

Replace the current match, and exit right away asking about further matches.

!

Replace the current match and all remaining matches without asking.

e

Edit the replacement term for the current match in the minibuffer, and then perform the replacement.

C-r

Enter recursive edit. This allows you to pause the current Term Replace session, perform some edits, or otherwise use Emacs however you please, an then resume Term Replace from the same point by typing C-M-c. See (emacs)Recursive Edit.

If you include a new variable in the replacement term that does not appear in the template term, sweeprolog-query-replace-term uses that variable as-is in each replacement, expect if the matching term happens to contain a variable with that name already, in which case this command adds the suffix ‘Fresh’ to the name of the new variable from the replacement. Including a new variable in the replacement term is useful, for example, for introducing a new argument to a predicate.


7.24 Context Menu

In addition to the keybindings that Sweep provides for invoking its commands, it integrates with Emacs’s standard Context Menu minor mode to provide contextual menus that you interact with using the mouse.

Command: context-menu-mode

Toggle Context Menu mode. When enabled, clicking the mouse button down-mouse-3 (meaning “right-click”) activates a menu whose contents depend on its surrounding context.

Variable: sweeprolog-context-menu-functions

List of functions that create Context Menu entries for Prolog tokens. Each function should receive as its arguments the menu that is being created, the Prolog token’s description, its start position, its end position, and the position of the mouse click. It should alter the menu according to that context.

To enable Context Menu mode, type M-x context-menu-mode RET. To have Context Menu mode enabled automatically when Emacs starts, place a call to (context-menu-mode) in your Emacs initialization file. You can access the context menu by right-clicking anywhere in Emacs. If you do it in a Sweep Prolog mode buffer, you can invoke several Prolog-specific commands based on where you click in the buffer.

If you right-click on a Prolog file specification or module name, Sweep suggests visiting it either in the current window or in another. If you right-click on a predicate, it lets you view its documentation in a dedicated buffer (see Prolog Help). For variables, it enables the ‘Rename Variable’ menu entry that you can use to rename the variable you click on across its containing clause (see Renaming Variables).

You can further extend and customize the context menu that Sweep Prolog mode provides by adding functions to the variable sweeprolog-context-menu-functions. Each function on this list receives the menu that is being created and a description of the clicked Prolog token, and it can extend the menu with entries before Emacs displays the menu.


7.25 Renaming Variables

You can rename a Prolog variable across the current top-term with the following command:

C-c C-r

Rename a variable across the topmost Prolog term at point (sweeprolog-rename-variable).

User Option: sweeprolog-rename-variable-allow-existing

If non-nil, allow selecting an existing variable name as the new name of a variable being renamed with sweeprolog-rename-variable. If it is the symbol confirm, allow but ask for confirmation first. Defaults to confirm.

The command sweeprolog-rename-variable, bound to C-c C-r, prompts for two variable names and replaces all occurrences of the first variable in the term at point with the second. The prompt for the first (old) variable name provides completion based on the existing variable names in the current term, and it uses the variable at point as its default.

The user option sweeprolog-rename-variable-allow-existing controls what happens if the second (new) variable name that you insert in the minibuffer already occurs in the current clause. By default it is set to confirm, which says to ask for confirmation before selecting an existing variable name as the new name. This is because renaming a variable to another existing variable name potentially alters the semantics of the term by merging the two variables. Other alternatives for this user option are t for allowing such merges without confirmation, and nil for refusing them altogether.

If Context Menu mode is enabled, you can also rename variables by right-clicking on them with the mouse and selecting ‘Rename Variable’ from the top of the context menu. See Context Menu, for more information about context menus in Sweep.


7.26 Numbered Variables

A widespread convention in Prolog is using a common prefix with a numeric suffix to name related variables, such as Foo0, Foo1, etc. Sweep provides convenient commands for managing such numbered variable sequences consistently:

C-c C-+

Prompt for a numbered variable and increment it and all numbered variables with the same base name and a greater number in the current clause (sweeprolog-increment-numbered-variables).

C-c C--

Prompt for a numbered variable and decrement it and all numbered variables with the same base name and a greater number in the current clause (sweeprolog-decrement-numbered-variables).

Numbering variables is often used to convey the order in which they are bound. For example:

%!  process(+State0, -State) is det.

process(State0, State) :-
    foo(State0, State1),
    bar(State2, State1),
    baz(State2, State).

Here State0 and State are respectively the input and output arguments of process/2, and State1 and State2 represent intermediary stages between them.

The command C-c C-+ (sweeprolog-increment-numbered-variables) prompts you for a numbered variable in the current clause, and increments the number of that variable along with all other numbered variables with the same base name and a greater number. You can use it to “make room” for another intermediary variable between two sequentially numbered variables. If you call this command with point on a numeric variable, it suggests that variable as the default choice. If you call this command with a prefix argument, it increments by the numeric value of the prefix argument, otherwise it increments by one.

For instance, typing C-c C-+ State1 RET with point anywhere in the definition of process/2 from the above example results in the following code:

process(State0, State) :-
    foo(State0, State2),
    bar(State3, State2),
    baz(State3, State).

Note how sweeprolog-increment-numbered-variables replaced all occurrences of State1 with State2, while the original occurrences of State2 are replaced with State3. The overall semantics of the clause doesn’t change, but you can now replace the call to foo/2 with two goals and reintroduce State1 as an intermediary result between them while keeping your numbering consistent, e.g.:

process(State0, State) :-
    one(State0, State1), two(State1, State2),
    bar(State3, State2),
    baz(State3, State).

If Context Menu mode is enabled, you can also invoke sweeprolog-increment-numbered-variables by right-clicking on a numbered variables and selecting ‘Increment Variable Numbers’ from the context menu. See Context Menu.

The command C-c C-- (sweeprolog-decrement-numbered-variables) is similar to C-c C-+ except it decrements all numbered variables starting with a given numbered variable rather than incrementing them. When you delete an intermediary numbered variable and end with a gap in the variable numbering sequence, you can use this command to close the gap by decrementing the following numbered variables.

After invoking either C-c C-- or C-c C-+, you can continue to decrement or increment the same set of numbered variables by repeating with - and +.


7.27 Macro Expansion

Recent versions of SWI-Prolog include a pre-processing mechanism called Prolog macros, implemented in library(macros). It provides a convenient way for computing terms at compile time and using them in code.

Macros are defined using special rules with #define(Macro, Replacement) head terms. Then, when SWI-Prolog reads a term of the form #(Macro) during compilation, it invokes the macro replacement rule and uses the expanded term instead.

Sweep can replace macro invocations with their expansions. To expand a macro in your source code, use the following command:

Command: sweeprolog-expand-macro-at-point

Replace the Prolog macro invocation starting at point with its expansion.

You can call this command with point on the # macro indicator to expand the macro inline. To undo the expansion, use C-/ (undo).

With Context Menu mode enabled, you can also expand macros by right-clicking on the # and selecting ‘Expand Macro’ from the context menu. See Context Menu.


7.28 Extracting Goals to Separate Predicates

Sweep can help you extract a part of the body of a Prolog clause into a separate predicate, so you can reuse it in other places.

Command: sweeprolog-extract-region-to-predicate

Extract the goal between point and mark into a new predicate.

This command extracts the selected goal into a separate predicate. It prompts you for the name of the new predicate and inserts a definition for that predicate in the current buffer, while replacing the current region with a call to this new predicate. The body of the new predicate is the goal in the current region, and this command determines the arguments of the new predicate based on the variables that the goal to extract shares with the containing clause.

If the selected goal contains a cut whose scope would change as a result of being extracted from the current clause, sweeprolog-extract-region-to-predicate warns you about it and asks you to confirm before continuing. If your code already includes a definition for the predicate that sweeprolog-extract-region-to-predicate would define, this command similarly warns you and asks for confirmation.

If you call sweeprolog-extract-region-to-predicate when the region does not contain a valid Prolog term, this command complains and refuses to extract the invalid term.

By default, sweeprolog-extract-region-to-predicate is not bound directly to any key in Sweep Prolog mode; instead, you can invoke it by typing M-RET (sweeprolog-insert-term-dwim) when the region is active. See Context-Based Term Insertion.

If you invoke sweeprolog-extract-region-to-predicate with a prefix argument—either directly or via sweeprolog-insert-term-dwim by typing C-u M-RET with an active region—then after extracting the selected goal to a new predicate, this command searches the current buffer for other goals that the selected goal subsumes, and suggests replacing them with invocations of the newly defined predicate. See Query Replace Term.

With Context Menu mode enabled, you can also invoke this command by right-clicking on an active region and selecting ‘Extract to New Predicate’.


8 Prolog Help

Sweep provides a way to read SWI-Prolog documentation via the standard Emacs help user interface, akin to Emacs’s built-in describe-function (C-h f) and describe-variable (C-h v). For more information about Emacs help and its special major mode, help-mode, (emacs)Help Mode.

Command: sweeprolog-describe-module

Prompt for a Prolog module and display its full documentation in a help buffer.

Command: sweeprolog-describe-predicate

Prompt for a Prolog predicate and display its full documentation in a help buffer.

The command sweeprolog-describe-module prompts for the name of a Prolog module and displays its documentation in the *Help* buffer. To jump to the source code from the documentation, press s (help-view-source).

Similarly, you can use M-x sweeprolog-describe-predicate RET to display the documentation of a Prolog predicate. This commands prompts for a predicate with completion. When the cursor is over a predicate definition or invocation in a Sweep Prolog mode, that predicate is set as the default selection and can be described by simply typing RET in response to the prompt.


9 The Prolog Top-level

Sweep provides a classic Prolog top-level interface for interacting with the embedded Prolog runtime. To start the top-level, use M-x sweeprolog-top-level RET. This command opens a buffer with an interactive Prolog top-level.

Command: sweeprolog-top-level

Run an interactive Prolog top-level in a buffer.

sweeprolog-top-level creates a buffer named *sweeprolog-top-level*, and connects it to a Prolog top-level. If the *sweeprolog-top-level* buffer already exists, this command simply displays the existing buffer. See Multiple Top-levels to learn about using multiple top-level buffers at the same time.

The top-level buffer uses the Sweep Top-level major mode (sweeprolog-top-level-mode). This mode derives from comint-mode, which is the common mode used in Emacs REPL (Read Evaluate Print Loop) interfaces. As a result, the top-level buffer inherits the features present in other comint-mode derivatives, most of which are described in (emacs)Shell Mode.

Top-level buffers are backed by Prolog threads that run in the same process as Emacs and the main Prolog runtime. On Unix systems, top-levels communicate with their corresponding threads via a pseudo-terminal device (pty). Alternatively, Sweep top-level buffers can communicate with their threads via a local TCP connection. You can force Sweep to use TCP instead of a pty on Unix systems by customizing the user option sweeprolog-top-level-use-pty to nil.

User Option: sweeprolog-top-level-use-pty

Whether to use pty for top-level communication. If this is non-nil, Sweep top-level buffers communicate with their top-level threads via a pty, otherwise they use a local TCP connection.

sweeprolog-top-level-use-pty is on by default on systems where Emacs can use a pty. On other systems, such as MS Windows, or when otherwise sweeprolog-top-level-use-pty is set to nil, Sweep creates a TCP server socket bound to a random port to accept incoming connections from top-level buffers. Sweep only starts this TCP server socket when you first invoke of sweeprolog-top-level, so there are no listening sockets before you actually use the top-level. The TCP server only accepts connections from the local machine, but note that other users on the same host might be able to connect to the TCP server socket and get a Prolog top-level. This may be a security concern if you are sharing a host with untrusted users, so you should be careful about using sweeprolog-top-level with sweeprolog-top-level-use-pty set to nil on shared machines.

When Emacs connects to a top-level via a pty, the top-level uses ANSI escape sequences to add colored output and other features. Emacs interprets these escape sequences by default and turns them into text properties for the top-level output. If you want Emacs to filter out ANSI escape sequences and disable output coloring, set the user option ansi-color-for-comint-mode to the symbol filter.


9.1 Interacting with the Top-level

When you start a new top-level, it prompts you to enter a Prolog query by displaying the query prompt, which is usually ‘?- ’. You post your query by typing it at the prompt, and pressing RET (comint-send-input) to send it. If the query succeeds with a choicepoint, the top-level lets you to perform one of several actions by typing a single character, such as ; to get the next answer. Sweep Top-level mode detects that the top-level expects a single character input, and sends the character you type to the top-level immediately. After the top-level is done with answering your query, it prompts you again to post a new one.

The Sweep top-level provides input completion at the query prompt, which works similarly to the in-buffer completion you get in Sweep Prolog mode buffers (see Code Completion). Namely, to complete a partial predicate name or other input in the top-level prompt, type C-M-i (or M-TAB).


9.2 Multiple Top-levels

You can create and use any number of top-levels at the same time, each top-level with its own buffer. If a top-level buffer already exists, sweeprolog-top-level simply opens it by default. To create another one or more top-level buffers, run sweeprolog-top-level with a prefix argument (C-u M-x sweeprolog-top-level RET) to choose a different buffer name. Alternatively, run the command C-x x u (rename-uniquely) in the buffer called *sweeprolog-top-level* and then do M-x sweeprolog-top-level RET again. This changes the name of the original top-level buffer to something like *sweeprolog-top-level*<2> and allows the new top-level to claim the buffer name *sweeprolog-top-level*.


9.3 The Top-level Menu buffer

Sweep provides a convenient interface for listing the active Prolog top-levels and operating on them, called the Top-level Menu buffer. This buffer shows the list of active Sweep top-level buffers in a table that includes information and statistics for each top-level.

Command: sweeprolog-list-top-levels

Display a list of running Prolog top-levels.

To open the Top-level Menu buffer, use the command M-x sweeprolog-list-top-levels RET. By default, the buffer is called *Sweep Top-levels*.

The Top-level Menu buffer uses a special major mode named sweeprolog-top-level-menu-mode. This mode provides several commands that operate on the top-level corresponding to the table row at point. The available commands are:

RET (Sweep Top-level Menu mode)

Open the specified top-level buffer (sweeprolog-top-level-menu-go-to).

k (Sweep Top-level Menu mode)

Kill the specified top-level buffer (sweeprolog-top-level-menu-kill).

s (Sweep Top-level Menu mode)

Signal the specified top-level buffer (sweeprolog-top-level-menu-signal). See Sending signals to running top-levels.

t (Sweep Top-level Menu mode)

Create a new top-level buffer (sweeprolog-top-level-menu-new).

g (Sweep Top-level Menu mode)

Update the Top-level Menu contents (revert-buffer).


9.4 Sending signals to running top-levels

When executing long running Prolog queries in the top-level, there may arise a need to interrupt the query, either to inspect the state of the top-level or to free it for running other queries. To signal a Sweep top-level that it should stop executing the current query and do something else instead, use the command sweeprolog-top-level-signal.

Command: sweeprolog-top-level-signal

Prompt for a Prolog goal and signal a top-level buffer to execute it.

This command prompts for an active Sweep top-level buffer followed by a Prolog goal, and interrupts the top-level causing it to run the specified goal.

C-c C-c
C-u C-c C-c

Interrupt the current Prolog top-level.

In a top-level buffer, you can use the command sweeprolog-top-level-signal-current to signal the current top-level. It is bound by default to C-c C-c. This command uses the value of the user option sweeprolog-top-level-signal-default-goal as the goal to signal, this is set by default to a goal that interrupts the top-level thread returns control of the top-level to the user. If you call sweeprolog-top-level-signal-current with a prefix argument (C-u C-c C-c), it prompts for the goal to signal.

You can also signal top-levels from the Sweep Top-level Menu buffer with the command sweeprolog-top-level-menu-signal with point at the entry corresponding to the wanted top-level (see The Top-level Menu buffer).

For more information about interrupting threads in SWI-Prolog, see Signaling threads in the SWI-Prolog manual.


9.5 Top-level History

Sweep top-level buffers provide a history of previous user inputs, similarly to other comint-mode derivatives such as shell-mode. To insert the last input from the history at the prompt, use M-p (comint-previous-input). See (emacs)Shell History, for a full description of history related commands.

User Option: sweeprolog-top-level-min-history-length

Minimum input length to record in the history of Sweep top-levels.

User Option: sweeprolog-top-level-persistent-history

How to persist input history for top-levels across Emacs sessions.

The Sweep top-level history only records inputs whose length is at least sweeprolog-top-level-min-history-length characters. This user option is set to 3 by default, and should generally be set to at least 2 to keep the history from being clobbered with single-character inputs, which are common in the top-level interaction, for example ; as used to invoke backtracking.

Sweep can optionally persist top-level input history. The user option sweeprolog-top-level-persistent-history controls if and where top-levels store their persistent history: when this option is non-nil, Sweep top-level buffers that you create read their input history from a persistent history file, and write their history back to it when you delete them. If this option is a string, it is treated as a file name, and top-level buffers use that file to persistent their input history. If it’s a function, it is called with no arguments and should return either a file name for the persistent history, or nil to disable persistent history for that top-level buffer. The file name that this user option specifies can be either absolute or relative, in which case it is expanded relative to the default directory of the top-level buffer (see (emacs)File Names). This option can also be a list of the form (project rel def), in which case the persistent history file that a top-level buffer uses depends on the current project of the of that buffer (see (emacs)Projects). If there is no current project, the top-level persistent history file is def. Otherwise, the history file is rel relative to the project’s root directory. You can leave def nil or omit it entirely to disable persistent history for top-levels that are not associated with any project. By default, this option is set to nil which says not to keep persistent top-level history.


9.6 Following Error Messages

Many standard SWI-Prolog facilities generate messages that refer to specific source code locations. For example, loading a Prolog file that contains singleton variables into the top-level produces warning messages pointing to the starting line of the clauses where the singleton variables occur. If you enable compilation-shell-minor-mode in the top-level buffer, Emacs recognizes the Prolog messages that refer to source locations and provides convenient commands for visiting such source locations from the top-level buffer. See (emacs)Compilation Mode, For more information about compilation-shell-minor-mode.

To use compilation-shell-minor-mode automatically in all top-level buffers, you can arrange for the sweeprolog-top-level-mode hook to enable it as follows:

(add-hook 'sweeprolog-top-level-mode-hook
          #'compilation-shell-minor-mode)


9.7 Sending Goals to the Top-level

You can send a goal to execute in a Prolog top-level from any buffer with the command M-x sweeprolog-top-level-send-goal RET.

C-c C-q

Execute a Prolog goal in a top-level buffer and display that buffer (sweeprolog-top-level-send-goal).

This command prompts for a Prolog goal in the minibuffer, executes it in a top-level buffer and displays that buffer if it’s not already visible. While inserting the goal in the minibuffer, you can use TAB (or C-i) to get completion suggestions.

In Sweep Prolog mode buffers, you can invoke sweeprolog-top-level-send-goal by typing C-c C-q. It also uses the goal at point (if any) as the “future history” for the goal prompt, which you can access with M-n in the minibuffer.


10 Executing Prolog Asynchronously

Sweep provides a facility for executing Prolog goals in separate threads and capturing their output in Emacs buffers as it is produced. You can use this for running queries without blocking Emacs.

C-c C-&

Execute a Prolog goal asynchronously and display its output in a dedicated buffer (sweeprolog-async-goal).

The command sweeprolog-async-goal, bound to C-c C-& in Sweep Prolog mode buffers, prompts for a Prolog goal and executes it in a new Prolog thread, redirecting its output and error streams to an Emacs buffer that gets updated asynchronously.

This is similar in nature to running asynchronous shell commands with the standard M-& (async-shell-command) or M-x compile commands, expect that sweeprolog-async-goal runs a Prolog goal instead of a shell command. For more information about the aforementioned commands, see (emacs)Single Shell and (emacs)Compilation.

The output buffer that sweeprolog-async-goal creates uses a dedicated mode called Sweep Async Output mode. This mode is derived from the standard Compilation mode, and it provides all of the usual commands documented in (emacs)Compilation Mode. Notably, you can run the same query again by typing g (sweeprolog-async-goal-restart) in the output buffer. To interrupt the goal running in the current output buffer, press C-c C-k (kill-compilation).

Compatibility note: asynchronous queries use pipe processes that require Emacs 28 or later and SWI-Prolog 9.1.4 or later.


11 Finding Prolog Code

The following commands let you jump to a piece of Prolog code from anywhere in Emacs:

Command: sweeprolog-find-module

Prompt for a known Prolog module and find its source code.

Command: sweeprolog-find-predicate

Prompt for a known Prolog predicate and find its source code.

sweeprolog-find-module and sweeprolog-find-predicate prompt you for a Prolog identifier (respectively, a module name or a predicate indicator), and jump to its source definition. Sweep integrates with Emacs’s standard completion API to annotate candidate modules in the completion UI with a summary line derived from their documentation, when available.

By default, these commands use the current window to display the selected module or predicate. To have it in another window instead, invoke these commands with a prefix argument (C-u M-x sweeprolog-find-predicate RET).

The command sweeprolog-find-predicate uses the function sweeprolog-read-predicate for prompting you to insert a predicate indicator in the minibuffer. This is the standard function that Sweep commands use for this purpose. It provides completion candidates based on known predicates, and it uses the predicate at point, if any, as the default minibuffer argument. By default, sweeprolog-read-predicate includes all predicates that Sweep knows about as completion candidates, except for predicates whose functor name begins with $, because that’s the convention in SWI-Prolog for internal predicates that are usually of little interest to users. To include also these predicates as completion candidates, customize the user option sweeprolog-predicate-visible-p-function to nil.


11.1 Prolog file specification expansion

Sweep defines a handler for the Emacs function expand-file-name that recognizes Prolog file specifications, such as library(lists), and expands them to their corresponding absolute paths. This means that you can use Prolog file specifications with Emacs’s standard find-file (C-x C-f) to locate Prolog resources directly.

For example, typing C-x C-f library(pldoc/doc_man) RET opens the source of the pldoc_man module from the Prolog library, and C-x C-f pack(.) RET opens the Prolog packages directory.


11.2 Built-in Native Predicates

Some of the built-in predicates provided by SWI-Prolog, such as is/2, are implemented in C and included as native functions in the SWI-Prolog runtime. It is sometimes useful to examine the implementation of such native built-in predicates by reading its definition in the SWI-Prolog C sources. Sweep knows about SWI-Prolog native built-ins, and can find and jump to their definitions in C when the user has the SWI-Prolog sources checked out locally.

User Option: sweeprolog-swipl-sources

Location of the SWI-Prolog source code root directory.

The way Sweep locates the SWI-Prolog sources depends on the user option sweeprolog-swipl-sources. Setting it to nil disables searching for definitions of native built-ins altogether. To point Sweep to the root directory of the SWI-Prolog source code, set sweeprolog-swipl-sources to the name of that directory. Any non-nil non-string value says to try and locate a checkout of the SWI-Prolog sources among known project root directories (Sweep consults Emacs’s built-in project-known-project-roots to find your project roots, see (emacs)Projects).

With sweeprolog-swipl-sources set, the provided commands for finding predicate definitions operate seamlessly on native built-ins to display their C definitions. These commands include:

  • M-x sweeprolog-find-predicate,
  • M-. (xref-find-definitions) in Sweep Prolog mode buffers (see Definitions and References), and
  • s (help-view-source) in the *Help* buffer produced by M-x sweeprolog-describe-predicate (see Prolog Help).

12 Quick Access to Sweep Commands

Sweep defines a keymap called sweeprolog-prefix-map that provides global keybindings for several useful Sweep commands. By default, sweeprolog-prefix-map itself is not bound to any key. To bind it to C-c p, add the following to your Emacs configuration:

(keymap-global-set "C-c p" 'sweeprolog-prefix-map)

C-c p is the recommended binding for sweeprolog-prefix-map, but you’re free to pick any key sequence you like. As an example, with the above binding you can access the Sweep top-level from anywhere with C-c p t.

The full list of keybindings in sweeprolog-prefix-map, assuming the recommended key binding, is given below:

C-c p m

sweeprolog-find-module (see Finding Prolog Code).

C-c p p

sweeprolog-find-predicate (see Finding Prolog Code).

C-c p t

sweeprolog-top-level (see The Prolog Top-level).

C-c p q

sweeprolog-top-level-send-goal (see Sending Goals to the Top-level).

C-c p l

sweeprolog-load-buffer (see Loading Buffers).

C-c p &

sweeprolog-async-goal (see Executing Prolog Asynchronously).

C-c p B

sweeprolog-list-breakpoints (see Breakpoint Menu).

C-c p P

sweeprolog-pack-install (see Installing Prolog Packages).

C-c p R

sweeprolog-restart (see Prolog Initialization and Cleanup).

C-c p F

sweeprolog-set-prolog-flag (see Setting Prolog Flags).

C-c p T

sweeprolog-list-top-levels (see The Top-level Menu buffer).

C-c p X

sweeprolog-xref-project-source-files (see Definitions and References).

C-c p h m

sweeprolog-describe-module (see Prolog Help).

C-c p h p

sweeprolog-describe-predicate (see Prolog Help).

C-c p h e

sweeprolog-view-messages (see Examining Prolog Messages).

C-c p h n

sweeprolog-view-news (see Discovering Sweep).


13 Examining Prolog Messages

Sweep redirects messages that the embedded Prolog runtime emits to a dedicated Emacs buffer. By default, the Sweep messages buffer is named *Sweep Messages*. To instruct Sweep to use another buffer name instead, customize the user option sweeprolog-messages-buffer-name to a suitable value.

The *Sweep Messages* buffer enables the minor mode compilation-minor-mode, which let’s you jump to source locations that appear in errors and warning by clicking on them.

Command: sweeprolog-view-messages

Display the Sweep messages buffer.

You can use the command M-x sweeprolog-view-messages RET to display the Sweep messages buffer. This command is bound to h e in sweeprolog-prefix-map (see Quick Access to Sweep Commands).


14 Setting Prolog Flags

SWI-Prolog has a set of flags that let you examine and configure the Prolog execution runtime. You can set Prolog flags from Emacs directly with the following command:

Command: sweeprolog-set-prolog-flag

Set the value of a Prolog flag.

This command let’s you interactively configure the embedded Prolog execution environment by changing the values of Prolog flags. It prompts you for a Prolog flag, with completion candidates annotated with their current values. Then, it prompts again for a Prolog term and sets the flag’s value to that term.

For more information about Prolog flags in SWI-Prolog, see Environment Control in the SWI-Prolog manual.

As an example, the Prolog flag double_quotes controls the interpretation of double quotes in Prolog code. By default, double_quotes is set to string, so for instance "foo" is read as a SWI-Prolog string. You can easily validate this in the Sweep top-level:

?- A = "foo".
A = "foo".

You can change the interpretation of double quotes to denote lists of character codes, by setting the value the double_quotes flag to codes with M-x sweeprolog-set-prolog-flag RET double_quotes RET codes RET. Evaluating A = "foo" again exhibits the different interpretation:

?- A = "foo".
A = [102, 111, 111].

Note that some flags have a thread-local value, and sweeprolog-set-prolog-flag always operates only on the main thread. To set flags in an existing top-level thread, use the predicate set_prolog_flag/2 directly in that top-level.


15 Installing Prolog Packages

You can install SWI-Prolog add-ons, also known as packs, with the following command:

Command: sweeprolog-pack-install

Install or upgrade a Prolog pack.

This command prompts from a pack name, with completion, and installs it or upgrades it to the latest available version. (See also Packs in the SWI-Prolog manual.)


16 Contributing

We highly appreciate all contributions, including bug reports, patches, improvement suggestions, and general feedback.

For a list of known areas where Sweep could use some work, see Things to do.


16.1 Setting up Sweep for local development

Since the Prolog and C parts of Sweep are distributed and installed along with SWI-Prolog (see Installation), the easiest way to set up Sweep for development is to start with a SWI-Prolog development setup. Clone the swipl-devel Git repository, go the subdirectory packages/sweep that contains Sweep as a Git submodule, and update it to the latest development version:

git clone --recursive https://github.com/SWI-Prolog/swipl-devel.git
cd swipl-devel/packages/sweep
git checkout master
git pull

The directory packages/sweep in the swipl-devel repository now contains the development version of Sweep. You can hack on Sweep’s source files and then (re)build SWI-Prolog to test your changes. See Building SWI-Prolog using cmake for more information about building SWI-Prolog from source.

If you only modify the Elisp library sweeprolog.el, you do not need to rebuild SWI-Prolog. You can simply evaluate and test your changes directly inside Emacs (see (emacs)Lisp Eval).

If you change sweep.c or otherwise want to rebuild SWI-Prolog, you can do that from the packages/sweep subdirectory by running the following command:

ninja -C ../../build

16.2 Submitting patches and bug reports

The best way to get in touch with the Sweep maintainers is via the Sweep mailing list.

Command: sweeprolog-submit-bug-report

Report a bug in Sweep to the maintainers via mail.

You can use the command M-x sweeprolog-submit-bug-report to easily contact the Sweep maintainers from within Emacs. This command opens a new buffer with a message template ready to be sent to the Sweep mailing list.


17 Things to do

The following sections list potential improvement for Sweep in different areas:


17.1 Improvements around editing Prolog

Respect font-lock-maximum-decoration

We should take into account the value of font-lock-maximum-decoration while highlighting sweeprolog-mode buffers. This variable conveys the user’s preferred degree of highlighting. A possible approach would be changing sweeprolog-analyze-fragment-to-faces such that each color fragment in the returned list states the minimum decoration level (1, 2 or 3) for which it should apply. sweeprolog-analyze-fragment-font-lock would then compare this target to the value of (font-lock-value-in-major-mode font-lock-maximum-decoration) and decide whether or not to apply the fragment.

Support M-x align

Sweep Prolog mode should integrate with align.el such that M-x align aligns arguments of consecutive predicate calls. Concretely, we need to locally set align-mode-rules-list to a suitable value in sweeprolog-mode.

Support code filling/formatting

Sweep Prolog mode should define a fill-paragraph-function, and perhaps also a normal-auto-fill-function, for code filling that takes into account Prolog-specific conventions.


17.2 General improvements

Facilitate interactive debugging

Sweep should facilitate interactive debugging of SWI-Prolog code. This is a big topic that we don’t clearly address. Perhaps this should be handled through a Debug Adapter Protocol integration similar to dap-swi-prolog (Debug Adapter Protocol for SWI-Prolog).

Integrate with project.el adding support for SWI-Prolog packs

It would be nice if Sweep would “teach” project.el to detect directories containing SWI-Prolog pack.pl package definitions as root project directories.

Extend the provided Elisp-Prolog interface

Currently, the Elisp interface that Sweep provides for querying Prolog only allows calling directly to predicates of arity 2 (see Querying Prolog), ideally we should provide a (backward-compatible) way for executing arbitrary Prolog queries.


Indices


Function index

Jump to:   C   D   I   K   N   S  
Index Entry  Section

C
complete-symbol: Code Completion
completion-at-point: Code Completion
context-menu-mode: Context Menu
cycle-spacing: Aligning Spaces

D
display-local-help: Hover for Help

I
indent-for-tab-command: Indentation

K
kill-backward-up-list: Term-based Editing

N
next-error: Showing Errors

S
sweeprolog-align-spaces: Aligning Spaces
sweeprolog-align-spaces: Aligning Spaces
sweeprolog-analyze-buffer: Highlighting
sweeprolog-async-goal: Async Queries
sweeprolog-backward-hole: Jumping to Holes
sweeprolog-backward-predicate: Predicate Boundaries
sweeprolog-breakpoint-menu-find: Breakpoint Menu
sweeprolog-breakpoint-menu-find-other-window: Breakpoint Menu
sweeprolog-breakpoint-menu-set-condition: Breakpoint Menu
sweeprolog-close-query: Querying Prolog
sweeprolog-count-holes: Jumping to Holes
sweeprolog-cut-query: Querying Prolog
sweeprolog-decrement-numbered-variables: Numbered Variables
sweeprolog-describe-module: Prolog Help
sweeprolog-describe-module: Prolog Help
sweeprolog-describe-predicate: Prolog Help
sweeprolog-describe-predicate: Prolog Help
sweeprolog-document-predicate-at-point: Documenting Code
sweeprolog-electric-layout-mode: Electric Layout mode
sweeprolog-electric-layout-mode: Electric Layout mode
sweeprolog-expand-macro-at-point: Macro Expansion
sweeprolog-expand-macro-at-point: Macro Expansion
sweeprolog-export-predicate: Exporting Predicates
sweeprolog-extract-region-to-predicate: Extract Goal
sweeprolog-extract-region-to-predicate: Extract Goal
sweeprolog-file-at-point: File Specifications
sweeprolog-fill-holes: Filling Holes
sweeprolog-find-file-at-point: File Specifications
sweeprolog-find-module: Finding Prolog Code
sweeprolog-find-module: Finding Prolog Code
sweeprolog-find-predicate: Finding Prolog Code
sweeprolog-find-predicate: Finding Prolog Code
sweeprolog-forward-hole: Jumping to Holes
sweeprolog-forward-hole-on-tab-mode: Jumping to Holes
sweeprolog-forward-hole-on-tab-mode: Jumping to Holes
sweeprolog-forward-predicate: Predicate Boundaries
sweeprolog-handle-command-line-args: Initialization
sweeprolog-highlight-variable: Highlight Variables
sweeprolog-highlight-variable: Highlight Variables
sweeprolog-increment-numbered-variables: Numbered Variables
sweeprolog-indent-line: Indentation
sweeprolog-infer-indent-style: Indentation
sweeprolog-infer-indent-style: Indentation
sweeprolog-info-manual: Discovering Sweep
sweeprolog-info-manual: Discovering Sweep
sweeprolog-initialize: Initialization
sweeprolog-insert-term-dwim: Insert Term DWIM
sweeprolog-insert-term-with-holes: Terms with Holes
sweeprolog-list-breakpoints: Breakpoint Menu
sweeprolog-list-breakpoints: Breakpoint Menu
sweeprolog-list-top-levels: Top-level Menu
sweeprolog-list-top-levels: Top-level Menu
sweeprolog-load-buffer: Loading Buffers
sweeprolog-make-example-usage-comment: Usage Comments
sweeprolog-mark-predicate: Predicate Boundaries
sweeprolog-maybe-define-predicate: Insert Term DWIM
sweeprolog-maybe-extract-region-to-predicate: Insert Term DWIM
sweeprolog-maybe-insert-next-clause: Insert Term DWIM
sweeprolog-mode: Editing Prolog Code
sweeprolog-mode: Editing Prolog Code
sweeprolog-next-solution: Querying Prolog
sweeprolog-open-query: Querying Prolog
sweeprolog-pack-install: Prolog Packages
sweeprolog-pack-install: Prolog Packages
sweeprolog-plunit-testset-skeleton: Writing Tests
sweeprolog-plunit-testset-skeleton: Writing Tests
sweeprolog-query-replace-term: Term Replace
sweeprolog-read-predicate: Finding Prolog Code
sweeprolog-read-predicate-documentation-default-function: Documenting Code
sweeprolog-read-predicate-documentation-with-holes: Documenting Code
sweeprolog-rename-variable: Renaming Variables
sweeprolog-restart: Initialization
sweeprolog-set-breakpoint: Setting Breakpoints
sweeprolog-set-prolog-flag: Prolog Flags
sweeprolog-set-prolog-flag: Prolog Flags
sweeprolog-show-diagnostics: Showing Errors
sweeprolog-shutdown: Initialization
sweeprolog-shutdown: Initialization
sweeprolog-submit-bug-report: Bug Reports
sweeprolog-submit-bug-report: Bug Reports
sweeprolog-term-search: Term Search
sweeprolog-top-level: The Prolog Top-level
sweeprolog-top-level: The Prolog Top-level
sweeprolog-top-level-menu-go-to: Top-level Menu
sweeprolog-top-level-menu-kill: Top-level Menu
sweeprolog-top-level-menu-new: Top-level Menu
sweeprolog-top-level-menu-signal: Top-level Menu
sweeprolog-top-level-mode: The Prolog Top-level
sweeprolog-top-level-send-goal: Send to Top-level
sweeprolog-top-level-signal: Top-level Signaling
sweeprolog-top-level-signal: Top-level Signaling
sweeprolog-top-level-signal: Top-level Signaling
sweeprolog-top-level-signal-current: Top-level Signaling
sweeprolog-update-dependencies: Code Dependencies
sweeprolog-view-messages: Prolog Messages
sweeprolog-view-messages: Prolog Messages
sweeprolog-view-news: Discovering Sweep
sweeprolog-view-news: Discovering Sweep
sweeprolog-xref-project-source-files: Cross References

Jump to:   C   D   I   K   N   S  

Next: , Previous: , Up: Indices   [Contents][Index]

Variable index

Jump to:   I   S  
Index Entry  Section

I
indent-tabs-mode: Indentation

S
sweeprolog-analyze-buffer-max-size: Highlighting
sweeprolog-analyze-buffer-min-interval: Highlighting
sweeprolog-analyze-buffer-on-idle: Highlighting
sweeprolog-context-menu-functions: Context Menu
sweeprolog-dependency-directive: Code Dependencies
sweeprolog-enable-cursor-sensor: Highlight Variables
sweeprolog-enable-cycle-spacing: Aligning Spaces
sweeprolog-enable-eldoc: Showing Prolog Docs
sweeprolog-enable-flymake: Showing Errors
sweeprolog-enable-help-echo: Hover for Help
sweeprolog-faces-style: PceEmacs Theme
sweeprolog-highlight-breakpoints: Setting Breakpoints
sweeprolog-highlight-holes: Highlighting Holes
sweeprolog-indent-offset: Indentation
sweeprolog-init-args: Initialization
sweeprolog-insert-term-functions: Insert Term DWIM
sweeprolog-messages-buffer-name: Prolog Messages
sweeprolog-mode-hook: Editing Prolog Code
sweeprolog-module-header-comment-skeleton: Creating New Modules
sweeprolog-new-predicate-location-function: Insert Term DWIM
sweeprolog-note-implicit-autoloads: Code Dependencies
sweeprolog-predicate-visible-p-function: Finding Prolog Code
sweeprolog-prefix-map: Quick Access Keymap
sweeprolog-qq-mode-alist: Quasi-Quotation
sweeprolog-read-predicate-documentation-function: Documenting Code
sweeprolog-rename-variable-allow-existing: Renaming Variables
sweeprolog-swipl-path: Getting Started
sweeprolog-swipl-sources: Native Predicates
sweeprolog-swipl-sources: Native Predicates
sweeprolog-top-level-min-history-length: Top-level History
sweeprolog-top-level-mode: The Prolog Top-level
sweeprolog-top-level-persistent-history: Top-level History
sweeprolog-top-level-signal-default-goal: Top-level Signaling
sweeprolog-top-level-use-pty: The Prolog Top-level

Jump to:   I   S  

Next: , Previous: , Up: Indices   [Contents][Index]

Keystroke index

Jump to:   C   M   O   R   S   T  
Index Entry  Section

C
c (Sweep Breakpoint Menu mode): Breakpoint Menu
C-0 C-c C-i: Jumping to Holes
C-0 C-c TAB: Jumping to Holes
C-c C-%: Usage Comments
C-c C-&: Async Queries
C-c C-+: Numbered Variables
C-c C--: Numbered Variables
C-c C-b: Setting Breakpoints
C-c C-c (Sweep Prolog mode): Highlighting
C-c C-c (Sweep Top-level mode): Top-level Signaling
C-c C-d: Documenting Code
C-c C-e: Exporting Predicates
C-c C-i: Jumping to Holes
C-c C-I: Jumping to Holes
C-c C-l: Loading Buffers
C-c C-o: File Specifications
C-c C-q: Send to Top-level
C-c C-r: Renaming Variables
C-c C-s: Term Search
C-c C-S: Term Replace
C-c C-u: Code Dependencies
C-c C-`: Showing Errors
C-c p & (Recommended Bindings): Quick Access Keymap
C-c p B (Recommended Bindings): Quick Access Keymap
C-c p F (Recommended Bindings): Quick Access Keymap
C-c p h e (Recommended Bindings): Quick Access Keymap
C-c p h m (Recommended Bindings): Quick Access Keymap
C-c p h n (Recommended Bindings): Quick Access Keymap
C-c p h p (Recommended Bindings): Quick Access Keymap
C-c p l (Recommended Bindings): Quick Access Keymap
C-c p m (Recommended Bindings): Quick Access Keymap
C-c p p (Recommended Bindings): Quick Access Keymap
C-c p P (Recommended Bindings): Quick Access Keymap
C-c p q (Recommended Bindings): Quick Access Keymap
C-c p R (Recommended Bindings): Quick Access Keymap
C-c p t (Recommended Bindings): Quick Access Keymap
C-c p T (Recommended Bindings): Quick Access Keymap
C-c p X (Recommended Bindings): Quick Access Keymap
C-c RET: Terms with Holes
C-c S-TAB: Jumping to Holes
C-c TAB: Jumping to Holes
C-h .: Hover for Help
C-i (Sweep Prolog mode): Indentation
C-m (Term Search): Term Search
C-M-i: Code Completion
C-M-m: Insert Term DWIM
C-M-^: Term-based Editing
C-r (Term Search): Term Search
C-s (Term Search): Term Search
C-u C-c C-c (Sweep Top-level mode): Top-level Signaling

M
M-.: Cross References
M-?: Cross References
M-g i: Cross References
M-g n: Showing Errors
M-g p: Showing Errors
M-h: Predicate Boundaries
M-n: Predicate Boundaries
M-p: Predicate Boundaries
M-RET: Insert Term DWIM
M-SPC: Aligning Spaces
M-TAB: Code Completion

O
o (Sweep Breakpoint Menu mode): Breakpoint Menu

R
RET (Sweep Breakpoint Menu mode): Breakpoint Menu
RET (Term Search): Term Search

S
s (Help mode): Prolog Help

T
TAB (Sweep Prolog mode): Indentation

Jump to:   C   M   O   R   S   T  

Previous: , Up: Indices   [Contents][Index]

Concept index

Jump to:   A   B   C   D   E   F   G   H   I   J   K   L   M   N   P   Q   R   S   T   U   V   W   X  
Index Entry  Section

A
alignment: Code Layout
ANSI escape sequences: The Prolog Top-level
architecture, of Sweep: Architecture
async queries: Async Queries
auto-insert: Creating New Modules
autoload: Code Dependencies

B
breakpoints: Setting Breakpoints
built-in native predicates: Native Predicates

C
cleanup Prolog: Initialization
code completion: Code Completion
command line arguments: Initialization
comments: Documenting Code
communication, top-level: The Prolog Top-level
completion, in the top-level: Top-level Interaction
completion-at-point: Code Completion
configuration: Getting Started
context menu: Context Menu
context-based term insertion: Insert Term DWIM
cross reference: Cross References

D
definitions, jumping to: Cross References
dependencies: Code Dependencies
design, of Sweep: Architecture
diagnostics: Showing Errors
document code: Documenting Code

E
editing terms: Term-based Editing
electric layout: Electric Layout mode
escape sequences, ANSI: The Prolog Top-level
exporting predicates: Exporting Predicates
extract goal: Extract Goal

F
flymake: Showing Errors
fontification: Highlighting

G
global prefix keymap: Quick Access Keymap

H
highlighting: Highlighting
highlighting variables: Highlight Variables
holes: Holes

I
imenu: Cross References
indentation: Indentation
indentation style: Indentation
install: Installation

J
jumping to definitions: Cross References
jumping to references: Cross References

K
keymap, for global commands: Quick Access Keymap

L
layout: Code Layout
loading: Loading Buffers

M
major mode for Prolog, sweeprolog-mode: Editing Prolog Code
messages: Prolog Messages
modules, exporting predicates: Exporting Predicates
motion, predicate-based: Predicate Boundaries

N
native built-in predicates: Native Predicates

P
PceEmacs theme: PceEmacs Theme
pldoc: Documenting Code
plunit: Writing Tests
predicate-based motion: Predicate Boundaries
predicates, exporting: Exporting Predicates
prefix keymap, global commands: Quick Access Keymap
prolog flags: Prolog Flags
prolog help: Prolog Help
Prolog major mode, sweeprolog-mode: Editing Prolog Code

Q
query asynchronously: Async Queries
query replace term: Term Replace

R
refactor replace: Term Replace
refactor, extract to separate definition: Extract Goal
references, jumping to: Cross References
replace term: Term Replace
replace, search and: Term Replace
requirements: Installation
restart Prolog: Initialization
right click menu: Context Menu

S
S-expressions: Term-based Editing
search term: Term Search
semantic highlighting: Highlighting
sexps: Term-based Editing
shutdown Prolog: Initialization
signaling Prolog threads: Top-level Signaling
Sweep: Overview
Sweep architecture: Architecture
Sweep Async Output mode: Async Queries
Sweep design: Architecture
sweep Prolog flag: Initialization
Sweep Prolog mode: Editing Prolog Code
Sweep Top-level mode: The Prolog Top-level
sweep-module: Architecture
sweep.c: Architecture
sweep.pl: Architecture
sweeprolog-mode: Editing Prolog Code
sweeprolog-pce, theme: PceEmacs Theme
sweeprolog.el: Architecture
syntax highlighting: Highlighting

T
term insertion at-point: Insert Term DWIM
term replace: Term Replace
term search: Term Search
terms, editing: Term-based Editing
testing: Writing Tests
theme, PceEmacs: PceEmacs Theme
theme, sweeprolog-pce: PceEmacs Theme
threads, signaling: Top-level Signaling
top-level: The Prolog Top-level
top-level communication: The Prolog Top-level
top-level completion: Top-level Interaction
Top-level Menu: Top-level Menu

U
update: Installation
upgrade: Installation

V
variable highlighting: Highlight Variables

W
whitespace: Code Layout

X
xref: Cross References

Jump to:   A   B   C   D   E   F   G   H   I   J   K   L   M   N   P   Q   R   S   T   U   V   W   X  

Footnotes

(1)

See Prolog Unit Tests in the SWI-Prolog manual.